Search the Community
Showing results for tags 'melsoft'.
Found 6 results
remy00 posted a topic in MitsubishiHello, I got problem with melsoft GT Designer 3. I created a project and i must go threw recipes. I think I did everything well but my Record No. doesnt work as it should... https://drive.google.com/drive/folders/1p06cnkcfnmodmuLDfrhlshtlYgbUsFnj?usp=sharing Here is video with presentation as it works and GTX file. It have to be done with this kind of recipe. I dont want standard recipe table I think its pretty easy and i have small error Thanks
MELSOFT GX3 program transfer - "The specified drive is out of capacity"
Transistor posted a topic in MitsubishiI'm making some changes to a project at a customer's site using all the same software, etc., that I created it in. I only use GX3 for this project so I'm not an expert. When I try to transfer I get ... ... immediately followed by ... Now I've got a red ERR light, P.RUN is blinking and we're out of production for a few hours. The error flags M8060 to M8069 are all zero. It may be related to two function blocks at the end of the transfer but the F4 Rebuild All function works fine. Can anyone help? Thanks!
Analog input melsoft (fx3u)
Bensuddy posted a topic in MitsubishiHello, I am new to the programming of logic controllers. I have a Chinese FX3U 24 inputs and outputs with analog in and outputs. I am trying to teach myself the basics of the programming but I am stuck at the analog part. what I am looking to do is create a program so that when a 12v battery bank voltage drops and rises it can trigger other outputs. I have a voltage divider which outputs 1/5 of the input. Thanks for your help in advance. Ben.
Convert project from MELSOFT GX Developer to GX Works3
Transistor posted a topic in MitsubishiOriginal FX3U project written with GX Developer FX Version 8.45X. I now want to program an FX5U with the same program (well, slightly modified). I have MELSOFT GX Works3. How do I import / convert the original project? I have done a web search but can't find the answer. The installed help files don't seem to cover the topic either. Many thanks.
how to set electronic gear in module QD77MS2
diraemon posted a topic in Mitsubishihello everyone,,,, I want to running the motor in 100 rpm but how to setting electronic gear to control speed in servo motor HG-SR502,, does anyone know how?
Device point error between Parameter and PLC
Arnold Schwarzenegger posted a topic in MitsubishiHello all, I am a beginner with PLCs programming. I have an issue on GX Developer programming software from Melsoft trying to program my Mitsubishi Q-series PLC. CPU is Q03UDCPU. When the program is written and I try to upload it to the PLC, with the write to PLC window, I check -Program -- MAIN and -Prameter -- PLC/Network/Remote, click EXECUTE and a message appears : "Device point that is set in parameter is not match the device point in PLC". I can't fix it. In Parameter - PLC Parameter - Q parameter setting (window) - I/O assignment tab : I have (see image). Whe I use CHECK button it says there is no error. The X41 input device is plugged on slot 1/00. I am making this folowing the instructions a PDF I found on the Mitsubishi electric's wesite : Q-series basic course (for GX Developer). Thanks for the help, A. S.