Search the Community
Showing results for tags 'melservo'.
Found 4 results
-
Hi! I would like to do some tuning on our machine, but the problem is that the machine stops and drops origin positions. I selected User Command method with Basic setting. After 5sec I started the tuning, the machine stops with the roblem of that axis. Is there a parameter bit that goes high (or low) during tuning? There're no strange sounds nor movements..even the amplifier doesn't give error code. Is there something else that i should check? In the Servo-Adjustments parameters, One Touch Tuning setting I found the Permissible Overshoot Amount Level is set to 0. Can it be the problem?
-
Hi. I am planning to do a full scale servo tuning on our producting machine. Is it possible to do it while the servos are in, assambled? I mean no production, no disassembling, servos stay where they are, just tuning them one by one with their empty load..
-
Hi all! We have a problem with a Mitsubishi system. After switch off the machine in home position and back on, it resets the servo encoder value to 0. I checked the servo parameters, and the Absolute encoder is enabled, the ext. battery is ok and no zero reseting in the program ( I think...). Is there a parameter I should check or some setting in the intelligent module? The system consists Q01CPU, QD77MS2 im., J4 200B amp with 6v battery, and HG-SR152 motor.
- 5 replies
-
- melservo
- mitsubishi
-
(and 2 more)
Tagged with:
-
Hello everyone! I have problem with understanding the usage/principle of operation of parameter "Mark detection number". In manual i read: "The number of mark detections is stored. "0" clear is executed at power supply ON. Continuous detection mode: 0 to 65535 (Ring counter) Specified number of detection mode: 0 to 32 Ring buffer mode: 0 to (number of buffers - 1) Refresh cycle: At mark detection" My question is which mark detections are stored? Servo detects some kind of marks? I am novice in servo programming, please explain in the easiest way. Thanks for help.
- 1 reply
-
- mitsubishi
- servo
-
(and 2 more)
Tagged with: