Search the Community
Showing results for tags 'at invalid'.
Found 6 results
-
I cannot figure out why I am getting an invalid AT?????? The Symbol is in the Variables list and when I link it to the Global Variable it auto populates, so I know it is there!! What is the issue?
-
I want to send data from internet to cx-supervisor via cx-supervisor website but error. i don't know how to resolve this problem .I attach photo below, people help me with
- 1 reply
-
- cx-supervisor
- runtime
-
(and 2 more)
Tagged with:
-
hi guys, i want to ask about cx supervisor development 3.0. i have problem with my cx supervisor. my cx-supervisor cant run, but can built succesfully. my cx supervisor 3.0 development version, my cx supervisor problem like this. do you have solution ?thx for attention,sorry for bad english best regards
- 2 replies
-
- cx-supervisor
- runtime
-
(and 2 more)
Tagged with:
-
Allen Bradley Cognex Communication issue
jpratik92 posted a topic in Allen Bradley / Rockwell Automation
Hello, I have a Cognex insight 5100 camera connected to Allen Bradley L62 processor. The is working fine since the last year but sometimes the I/O module faults out with error code 16#0022. I looked online it look it needed a Ethernet cable change ( I did that but no results). Then I looked at the firmware in the I/O module and firmware in the camera and I found a difference. The firmware in the camera is 4.06 and the firmware of I/O module in the PLC is 4.005. Can anyone help me resolve the communication issue ? I want to know how to downgrade the camera firmware or change the revision in the PLC ( which I cannot ) Thanks in Advance-
- cognex allen bradley communication
- allen bradley
- (and 4 more)
-
Allen Bradley Cognex Communication issue
jpratik92 posted a topic in Allen Bradley / Rockwell Automation
Hello, I have a Cognex insight 5100 camera connected to Allen Bradley L62 processor. The is working fine since the last year but sometimes the I/O module faults out with error code 16#0022. I looked online it look it needed a Ethernet cable change ( I did that but no results). Then I looked at the firmware in the I/O module and firmware in the camera and I found a difference. The firmware in the camera is 4.06 and the firmware of I/O module in the PLC is 4.005. Can anyone help me resolve the communication issue ? I want to know how to downgrade the camera firmware or change the revision in the PLC ( which I cannot ) Thanks in Advance-
- cognex allen bradley communication
- allen bradley
- (and 4 more)
-
Micrologix 1000 Invalid STI Interupt Setpoint Fault
mark.mckee posted a topic in Allen Bradley / Rockwell Automation
Hello A-B Guru's, I have a small station with a Micrologix 1000 controller in it. Keep getting a "Major Halt Error S:1/13, Invalid STI interrupt set point. Refer to S:30." It is a very simple program, not using the STI instruction. Have a filter on the processor power. Nothing crazy going on, on the station, no big coils, etc. What can I do to prevent this fault from occurring? Can I add a line of code to always unlatch S:30? What should I do? Please help.- 2 replies
-
- Micrologix 1000 Faults
- Invalid STI Interupt
-
(and 1 more)
Tagged with: