Search the Community

Good afternoon, I'm trying to add a custom image to the screen saver on the NA5 HMI, has anyone had experience with this? I can get to the screen saver setting on the device but there's only "Blank" screen as default, but I'd like to add my own image instead. Can anyone help? Thanks!

Hi every one, One of my machine i have to fix , has simatic pc unit installed that causing too much trouble  and client want to replace it with simple pc with additional profibus card installed in PCI slot, is there any way to configure image of simatic pc in new simple pc

Is it possible to change an image on a NA page with a subroutine. I have two images I want change between based on what happens on a page. The image control in VB does not show the imagefile property. Any idea on how I can do this.

Page 171 of the Crimson 2.0 manual for RedLion G3 HMI series talks about being able to display a photo/image as a primitive object.  On the HMI G3 series that must use Crimson 2.0.   The photo must be stored on the installed Compact Flash, using a command line utility program called "makepic".   The manual mentions most of the steps required; but, like so many "instructions", the Devil is in the details. I need a little help to launch this user program .. kind of a "tutorial"   Because I'm not really good with Command Line processes.    Yes. Crimson 2.0 is dated stuff, and Crimson 3.0 is awesome.. and it's very easy to use pictures on your HMI with C3  (been there done that I'm new to C2 ..  an' didn't appreciate what can happen if you purchase a RedLion G3 on eBay, without checking first if it can be configured with C3 ..DUH.   I just need the starting steps to launch makepic"  Thanks much, Regards, Michael

Hi, I am trying to change an image on a screen at runtime based on a user selection. With Me.FindElement(strObject) .Image = button .Width = 50 .Height = 50 .Top = 82 End With This does not work, and i can see that .Image is not an option for image, yet it shows on the property panel. StrObject is the image object that needs to be changed The variable button is a string that is the image title. Is there any way to do this? Any help would be appreciated.   Thanks Coxie

While creating some pages yesterday for the NA HMI, using Studio V1.17, I went to look for "images" to make some cool buttons.  Looking in Properties/Design/Image ..  some research told me I'll need to look for a file on this path: C:\Program Files\OMRON\CX-One\CX-Designer\intaparts\BMPfiles\ problem was... I didn't have CX-One ... or any BMP files (related to Omron) So, the question is.. Did Sysmac Studio ever get around to providing such "Image files" for HMI objects?   If so, can they be downloaded without having to purchase CX-One?    Thanks, Regards, Michael

PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software