Search the Community

Hi frnz, I need some tips to convert Modicon ladder program to functional block diagram. Notes:1.Logic of the program unknown. 2.Total 130 networks Thanks Hema

Hello, We have Modicon Momentum PLC and there is about 80 millions of Collision Errors (and growing cca 1.4 error per second) logged in Ethernet Statistics. In the manual they write only "This field should allways be 0". It is working for us though. We only have one problem that two machines on ADO 740 50 with ENT 110-01 stop simultaneously and irregularrly without any appearent reason. It is happening now for about 6 months, but I have calcluated that this collision errors accumulated over cca 2 years. My question is, what "Collision Errors" mean and could that by any chance make two particular machines on one ADO 740 50 module go off simultaneously?

Hi all, I do not have any experience with Modicon. Can someone tell me which software i have to use go online with TSX-PSY2600? and is it free? or should i buy the software? Thanks

Hello everyone, I'm having some trouble to setup the GSM configuration so I can receive alarms on my cell phone I'm using Schneider CPU Modicon M340 in association with a communication RTU NOR0200H and a Schneider Modem SR02 MOD02 this is the first time that I work on this kind of project, would you please help me I'm kind of blocked and I need a solution asap thank you for your time

My CPU 534 14B doesn't work. Run led flash 7 times. no possible MB+ connection, ERROR code meanings: 300 EXEC not loaded or 301 EXEC Checksum. It was working well then nothing can't even communicate with it. reset power without battery, download an other firmware (EXEC) 1.11 instead of 1.16, same problems. Someone can help on that case? I'm using NXT as programming software.

Hello all, first post here, and thanks in advance for the help. I'm a fairly green SCADA and controls designer and although I worked fairly extensively with these systems in the past, I followed a sightly different career path for the last several years and haven't had my hands on a PLC that whole time. Started a new job and am rebuilding my knowledge with it. Fortunately my company afforded me a PLC to take home and mess around with for this purpose. I feel pretty dumb as I am struggling to even connect with it, haha. Here are the stats: Backplane: TSXRKY4EX (end caps are securely in place) Power supply: TSX PSY2600 Processor: TSX P57 6634 First I attempted to connect via ethernet, using the IP address sticky-noted to the front of the processor: 10.1.1.80. No luck, "PLC address is incorrect, or PLC is busy, yadda yadda". As I understand, the default IP address can be converted from the MAC address. The last two MAC address numbers were: CF.87, which gave me the address 85.16.207.135. Same result with this. I tried pinging both address from the command console and had no luck there either. I happened to have a USB to unitelway adapter (Telemecanique brand) and attempted using that as well, Address:SYS.. Media:Unitelway. No luck, same answer. After a lot of frustration and hours spent scouring the internet for answers, I took the nuclear option and pulled the battery (while unplugged) and replaced after 30 or so seconds. I was assuming this would clear the memory and reset the IP to default (85.16.207.135), afterwhich I could reconfigure and start fresh. Unity still can't connect nor can I ping it. It should be noted that I am using Unity Pro XL Version 8.0, on a VMware image. I did attempt pinging from both the VM and the host machine, both can ping other known devices so connection by the VM through the host shouldn't be the problem. Neither the VM or the host recieved a ping reply from the PLC. Any help would be GREATLY appreciated. I feel I have exhausted all options and I hope I didn't shoot myself in the foot by pulling the battery. As far as whatever program was on it before is irrelevant, the PLC was given to me to do with whatever I wish, so memory loss wasn't a danger. I just need to connect to it. Thanks!!

Hi I have a scenario where I need to setup communication between a Mitsubishi L-series PLC to Schneider Modicon M580. I need to use the onboard ethernet port of the L-series PLC. The protocol I need to use, is Ethernet IP. (socket communication). Can someone please assist?

Not able to login to my new TM218 PLC. Scan yeilding no results. Pls help

can anyone please provide me how to communicate between keithley controller 2182A(nano voltmeter) and any modicon or schneider plc.aslo the programme & instruction & parameters..ASAP using RS-232 interface?