keithpetten

Good day, I have a Omron CPU35 with the CP1W-CIF12 422A/485 options board connected. I want to know how to wire this to my Omron NS15-TX01B-V2 and setup via rs485 protocol. Please help me with dip switch settings, cx programmer settings/changes and wiring for this. I tried several combinations and nothing works. Thanks in advance.

The magnetic pickup is installed into a Simark Controls liquid turbine flow meter. It is measuring flow going from a valve to a BOP stack. I just want to have the value sent to the PLC, then converted to the units the user wants, and displayed on a touchscreen panel.

I verified that I am under the specs of the ID212 card, so I believe it is just a programming error on my part if someone can have a look and direct me in the right direction.

@ MENDON SYSTEMS: What benefit will I get from changing my ID212 to a MD211? I thought that my ID212 was already a high speed card. Is the MD211 faster? Better for pulse? Or just personal preference?

Good day, I am trying to record 10 entries of data from my magnetic pickup. I want to keep 10 entries at all time, and average that value to be used in another function to convert to lpm, gpm, and other user friendly flows based on user preference. I have the pickup (EDD 4.5015U) connected to a ID212 input card(Input 5.10), on a CJ2M-CPU35. I am new to the CX Programmer and wanted to know if anyone can offer insight into where I am going wrong. I have attached the cxp file. Thank you in advance. Uploaded to mrplc.cxp