Elyas_gh
MrPLC Member-
Content count
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by Elyas_gh
-
Greetings How can the value in a cell from Excel File on a tag stored in the Wincc? And it is possible that The tag value sent to Siemens plc Thanks
-
how to migrate factorylink 6.6.0 application into WINCC
Elyas_gh posted a topic in Modicon / Telemecanique / Schneider Electric
Hello I have a factory link ver 6.6.0 applicaton. I would like to migrate this application into WINCC Is this possible? How do I do it? -
hello i need factory link version 7 and version 8. i have factory link 6.6.0 software I want to convert the project into a factory link 7 and 8 And in the end factory link 6.6.0 -----> migrate to wincc Please give a link to download factory link 7 and factory link 8 factory link 6.6.0 ----> factory link 7 ------> factory link 8 ------> wincc (siemens) Thank you
-
Holding Register_Modbus TCP IP
Elyas_gh posted a topic in Modicon / Telemecanique / Schneider Electric
Greetings How should the data via a function block 108 and the CP 343-1 card Posted in Telemecanique plc(premium P57 with ETY110ws) received? If in the siemens plc used the data block11 with start_db1 and end_db 100 ,who holding register have chosen to use the Telemecanique plc(PL7 V4.4) you write %mw1or %mw40001? DB11.dw1=%mw1 OR DB11.dw1=%mw40001 What is the purpose of Modbus register address? If possible, explain the file. Thanks Modbus TCP PN_CPU English.pdf -
Profibus Between siemens PLC and premium PLC
Elyas_gh posted a topic in Modicon / Telemecanique / Schneider Electric
Greetings Can the Profibus network ، Schneider Premium PLC with TSXPBY100 Module was selected as Slave? I'm going SIEMENS PLC (S7-400) as master and Schneider PLC as Slave tanks -
How can i export excel file into wincc with a C or Vb script
-
What is the best logic to control the flow and temperature?
Elyas_gh posted a topic in Modicon / Telemecanique / Schneider Electric
Greetings In my project, there are three control valve One of the hot water line with a diameter of 200 Another on the cold water line with a diameter of 100 And a third on the way mixing cold and hot water with diameter 200 installed. after the third valve One flow meter is installed And at the end of a temperature transmitter installed. What is the best logic for control flow and temperature? Thanks NewPdl2.pdf -
Greetings I used Siemens PLC with CP343-1 (IP 192.168.0.1) And also Telemecanique PLC(Premium) With ETY110ws (IP 192.168.0.2) I used the function FB108 (Modbuscp) in Siemens PLC And also the setting for the Netpro In siemens plc has been done. Telemecanique PLC(premium) on-line mode is identifiable by Siemens. For reading and writing data in Telemecanique plc how to act? Siemens has also been used in Telemecanique plc(Premium) IP address My problem is Telemecanique. if I used DB11 in Siemens PLC with Start_DB:1 and End_DB:100 and data_type:3 For Send to Telemecanique (Settings in the FB108 in siemens are correct). How will the data be received in Telemecanique plc (Premium)? Do you have a specific Function (ADR) be used? I used PL7 V4.4 and I canot use ADDM Function. Please help me I have an urgent need
-
Siemens plc and premium plc
Elyas_gh replied to Elyas_gh's topic in Modicon / Telemecanique / Schneider Electric
Hi Premium PLC is master and siemens PLC is Slave -
FB108(modbuscp)
Elyas_gh replied to Elyas_gh's topic in Modicon / Telemecanique / Schneider Electric
Thanks for your answer Dear cHud With Which command In telemecanique PLC Can I call a recipe %MW0 OR %MW1? Can I Use Fanction Read_var for recive Data on The MODBUS TCP IP With IP Address? -
Hi Friends i use FB108 (MODBUSCP) in the project with cpu 315(Cp343-1). I want send and receive data from siemens plc to premium plc . This is done by setting FB108: if data_type=Holding Register db_1=11 start_1=1 end_1=100 FB108 settings are correct and the connection is established. In premium plc to see the transmitted data of DB11, What should be done? If you have written %MW1or %MW40001
-
how can read/write on the modbus register address on the premium plc(p57 with PL7 v4.4)? I use Modbus tcp ip for connection telemecanique plc with ETY110ws to Siemens Plc with CP343-1.
-
What is the syntax of the IP address in a READ_VAR or WRITE_VAR block in premium plc?
Elyas_gh replied to Elyas_gh's topic in Modicon / Telemecanique / Schneider Electric
Thank you What is the order of {net.station} at Siemens plc? You can use the IP to address? -
Modbas TCP IP PROTOCOL AND ETY110ws
Elyas_gh posted a topic in Modicon / Telemecanique / Schneider Electric
Greetings Through Modbus TCP IP PROTOCOL In the Telemecanique Premium PLC With a card ETY110ws to send or receive data. Do you need a special setting in the network card? Need to use a specific function is? I use PL7 V4.4 CPU is TSX P57203 Please respond. Thanks... -
communication telemecanique plc and siemens plc+ethernet ETY110WS AND CP343-1
Elyas_gh posted a topic in Siemens
Greetings I have a CP343-1 is a plc siemens cpu315 plc telemecanique p57203 ETY110 ws is the card that I have. I want these two interface cards connected through the organization. Please advise what settings you need to do any plc plc how to send and receive data between blocks should be used. Thanks