[1769-HSC Card]

I am trying to read rpm coming into the card but not having any luck , can anyone help? I get 120 PPR , can someone tell me know to set this up. Processor 1769-L33erm thanks

[Modicon I/O]

can you tell me what this module does AS-B531-001 5-28vdc Latching DC

[Modicon I/O]

I am converting to a ControlLogix This modules I cannot find any specs on them AS-B531-001 5-28vdc Latching DC - what does this module do ? and how does it latch AS-b559-001 115vac Isolated AS-B558-001 10-48 vdc Input Looking for any specs on these modules Thankyou

[PLC5 interfacing with a Delta V DCS]

I have to interface a PLC5 with a Delta V Dcs looking for the easiest way to get this done . I don't know the dcs side so any help would be great.

[panelview plus printers]

yes but with it connect to the panelview plus was getting a unknown device on the usb side I did not try to connect it via ethernet . that is with the hp6980 printer

[remote i/o]

I would go Devicenet

[panelview plus printers]

I have a Panelview plus that I tried to connect a HP6980 to the USB port and did not work anyone have a list of what printers work with the USB port or do I have to go thur a hub for this to work . The HP6940 I think is on the list it has a usb port and ethernet . thanks for all you help

[dh485]

I am making a cable that goes from a 1747-AIC to a 9 pin serial connector does anyone have the Pin out for this , It is for a Panelview PLus using the serial port to talk to a SLC5/02 , Thanks for your help

[IMC-120 User manual]

Micky do you know where I can get the user manual which shows the Block transfer Configuration and programming of it . Thanks Again

[IMC-120 User manual]

Help I am looking for a IMC-120 user manual could anyone tell me where I can find one ? thankyou

[Panelview Plus 600 firmware download]

HERE IS THE LINK http://support.rockwellautomation.com/firmware.asp

[TMR DL405]

TIMER QUESTION , HOW DO YOU PROGRAM A TMR IF YOU USE A k10 THAT WOULD BE A TIMER OF 1 SECOND RIGHT, AND WHERE DO YOU SEE THE ACC VALUE.

[CLX TO PLC5]

thanks guys I did use the user manual to fiqure it out . Thankyou are all your replys .

[CLX TO PLC5]

I AM TRYING TO SEND A MESSAGE FROM THE CONTROL LOGIX PROCESSOR TO A PLC5 , DOES NOT SEEM TO WORK , IF ANYONE HAS SAMPLES OF THIS WOULD HELP OUT ALOT . tHANKYOU

[bulletin 1774]

okay there is a plc2 to plc5 conversion , then you export the .pc5 into work and change to SLC 500 adrresses, if you have a copy on a cassette 80 % of the time it can be imported into ai plc2 for a conversion. I only reason that it would not be able to import the ladder is if there is no End of the program put in the 1774 plc . Tell me how many rungs and could get you a price , I am out of Houston ,TX . this will import into any software that you want , BUT SOMETHING TO REMERBER IS IF YOU TRY TO INSTALL THIS INTO A PROCESSOR THAT WAS BUILT AFTER YOU SOFTWARE YOU SOFTWARE WILL NOT BE ABLE TO TALK TO IT . BARRY C

[Allen Bradley Xm?]

The XM modules are for vibration systems and blows away bently . Modules are connected like the flex io but are devicenet communications

[Plc Upgrade]

I do plc2 to plc5 or clx all the time if you do not have the conversion software best way is call tech support at 440 646-5800 and let them convert it for you price is $1 rung for the basic conversion .

[bulletin 1774]

Okay the 1774 plc was before the plc2 , there is a special cable you can make to Communicate with it using the AI Software for plc2 also there is a software package that you have to load for it . It would be easier to have Allen bradley CS Group Convert it for you . If you like to use the same IO could you tell me if you are using the 1778 or 1771 IO , if using the 1778 io you will need to buy the 1778-ASB which is very expensive . if you have any more Questions email bjclem@earthlink.net

[uploading .mer file for PV+]

Send me the runtime file and i should be able to convert it for you bjclem@earthlink.net

[PLC 2]

the 2 processors that you cannot talk to are mini plc"s 2 please give my the Number of the 2 you cannot talk to . i have had this problem but with only the plc2/15 please let me know

[Need firmware for SLC 5/05]

the slc5/05 uses control flash you do not need the eeprom should be able to get this download from the rockwell Software site.

[RSView Machine Edition]

if you email to me I can convert it for you .

[clx tag generator]

does anyone have a tag generator or logic generator for Control logix .

[conversion]

Rockwell Automation Tech Support converts all different plcs into CLX number is 1 440 646-5800 bc

[rsview32 .gfx files]

looking for some good conveyor layouts using mulitple of conveyors , anything would be helpfull