IAFRANCO
MrPLC Member-
Content count
23 -
Joined
-
Last visited
Community Reputation
0 NeutralAbout IAFRANCO
-
Rank
Sparky
Profile Information
- Country Mexico
Recent Profile Visitors
2023 profile views
-
The best virtualization software?
IAFRANCO replied to IAFRANCO's topic in Allen Bradley / Rockwell Automation
Thank´s all for your help! -
The best virtualization software?
IAFRANCO replied to IAFRANCO's topic in Allen Bradley / Rockwell Automation
Thank´s all for your help. Someone told me that vmware has problems whit ethernet comms, it´s that true? -
In WINDOWS 8 I need to install a virtual machine with Windows 7. I need to run RSVIEW32. Comms by ethernet. Wich is the best software? Thanks!
-
HELP with PANELVIEW PLUS
IAFRANCO replied to IAFRANCO's topic in Allen Bradley / Rockwell Automation
thank´s both for replay. The factorytalk view studio is the 5.10.00(CPR 9 SR 2) release. Panel view plus firmware says: ME Station 6.10.17.9 RSlinx Enterprise 5.50.3.17 Factory talk service platform 2.50.0.10 -
Hello, I have a problem with a panelview plus, i can´t see the panel at the transfer utility, it ´s appear a yellow interrogations mark and at rslinx classic too. I register the EDS and at rslinx classic transform to a gray cube, but in the trasfer utility not. How can i register the eds at rslinx enterprise? what can i do? thank´s (sorry for the english)
-
Thank´s for your help, the trendx was not installed.
-
I have a datalog file with 5 tags(floating values), i need to make a display with something like a sumary alarm to see the datalog file, i tried to use the log viewer but y can`t select the datalog file in the propierties. thanks for your help
-
My client has a 90-30 plc, he needs an economic HMI, he ask me for a panasonic hmi (GT,GN,GV series). thanks for your help
-
Thank´s
-
hello, i only have the step7 software, and i need to know if i can see and programm a simatic 5 plc. thanks sorry for my english
-
Thanks for the advice. regards
-
the problem is that i don´t have shunt module only the drives...
-
I´ve a problem with a kinetix 6000 drive, it has a E75 error. Can you help me with this error? what can i do? i have to replace the drive or the motor? thanks for all
-
We receive an old machine, and we are trying to put it work. it´s a wrapping machine, and it has 2 servo drives: Electro-craft BRU-200. Does anybody have the user manual? thanks and sorry for my english, je je
-
HELP! PROBLEM WITH RSVIEW32
IAFRANCO replied to IAFRANCO's topic in Allen Bradley / Rockwell Automation
Problem solved!! I looking for "numeric keypad" aplication on the web, it´s an active x control. i installed on the pc and in the rsview appears the numeric keypad, with this control i have no problem and it´s very easy to config. Thanks to every vary for your help!! i attached the file bye numerickeypad_1.00.0060.zip