santiago

                                                               It will be good to have modbus master FB's for the new M1 inverters 

Hello,  does any one have experience working with a NX controller and KINCO stepper drivers as axis via ethercat ? the EDS files are available from KINCO , but I wonder it will work , sometimes you cant be sure until you test it . thanks in advance

It will de nice to have an option for getting a cross-reference report for the AT address used on programs , as is now its easy to make mistakes double setting the same AT address on a program , specially this days that supplies of NA screens are not always availiable and using memory address is necessary for NB screens and SCADA communication and is difficult to keep track of the used address on a program , some times in global or in internals, right now its easy to make a mistake and use the same address twice , and this wont be detected on the compiling

all the inverters connected via Ethercat to an NX102-9000 

Hello , I am trying to run and parameters settings of several Q2V inverters +SI-ES3+JOHB-Q2V (option board for Ethercat), I managed to install the xml file for the settings , but I dont see as much settings as with the MX2 , and I cant find any related FB's as with the MX2, maybe someone has set this inverters before ? Thanks! 

replacing the power supply didn't help

Have the same problem , SLC5/04 CPU , all CPU leds bling in a sequence in a loop , but here is worth , this company I a servicing , cant find the program backups , so if the PLC is not back for an upload then maybe a new program from scratch on a new PLC will have to be done. I am attaching a small video of the leds sequence   VID_20210701_150227.mp4

Hello to all , I need to upload the program from an old Schneider Modicon 140 CPU 113 02 , there is no backup for the program in this PLC so its not possible to know what software was used for writing the program. Is it possible to upload the program from this PLC using Eco Structure Control Expert ?

Found a solution with "Ammy Admin", It works Ok on the embedded Windows.

Hi, anyone knows if there is a VNC program that will work on Windows XP embedded 2002 on a Beckhoff controller ? team viewer doesn't support Embedded or CE. maybe there is another solution? thanks!

Hi , anyone have any experience comunicating from Citect with the OMRON E5CN + E53-CNH03N2 Temperature Controller + comunication module? I have tried several variations of the Modbus drivers from Citect without any succes, since Citect doesn't have a CompoWay/F driver. Tried also RTU and ASCII modes not sucesfully. I do the comunications via RS232C - OMRON K3SC-10 conerter to RS 485 , it works OK when I use the program"Simply Modbus" to test the comunication , but havent succeeded with Citect , so the problem must be on the Citect settings or on using the correct driver. Also tried several driver settings at the "citect.ini" ,but not really working I get some communications but not really OK. I'll apreciate some help from someone with experience on this.

Hi , anyone have any experience comunicating with the E5CN + E53-CNH03N2 comunication module? I have tried several variations of the Modbus drivers from Citect without any succes, since Citect doesn't have a CompoWay/F driver. Tried also RTU and ASCII modes not sucesfully. I do the comunications via RS232C trough an OMRON K3SC-10 , it works OK when I use the program Simply Modbus to test the comunication , but havent succeeded with Citect , so the problem must be on the Citect settings or on using the correct driver. I'll apreciate some help from someone with experience on this.

for all my older applications I have being giving support with a Sony Ericson celular modem RS232C or with the older Nokia phones that have a RS2332C adaptor cable. This always changing the omron standard port settings since the celullar devices will just accept the JIS 8 bit set,all this using the periferial port with a CIF or the PLC RS232C port if abailiable since in some applications I have it for a MMI or for modbus. The thing is that with CP1H and CP1L is no longer possible to remote service through the USB programming port and sometimes the RS232 are used for MMI with a setup different thant the required for the celullar or the slot are in use for comm with other devices like modbus. Any one knows if there is an adaptor or modem in the market that can work from the PLC USB? I know that is always posible to add a C1W communication unit , but this add a substansial expense just for a possible service need.

Today I succesfully ended the programming for this panel , Its not so bad , a bit limited compared with the regular monochome Nt's , but I guess it have to be cheaper too , and for many applications more than enough. The special software is not so bad too. It can work very good in English , there is no other language capabilities , I just used it instinctively since I never had the manuals , but is easy to manage. I did something like 60 screens from scratch since I never got the correct password from the machine manufacturer. I wonder what is the price sale , and I think it must be a very good cost effective one. Thanks MPM for the software!!

maybe the only thing left to try is to connect through the periferial and turn all the setup DM to #0000, then turn off and on again