JustinSmith
MrPLC Member-
Content count
34 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by JustinSmith
-
AOP installation broke module RSL5000
JustinSmith replied to JustinSmith's topic in Allen Bradley / Rockwell Automation
They didnt tell me how unfortunately -
AOP installation broke module RSL5000
JustinSmith posted a topic in Allen Bradley / Rockwell Automation
Hello, My coworker and I are commissioning a new panel. We have a 1732-AENTR series C remote IO thats Rev 6.1. The project file from a previous identical panel has the module at rev5.3 in the project tree. I downloaded the AOP and ran the installer, it worked no issues. My co worker then did the same thing but now the module is unrecognized in the project tree and the module is missing after installing the AOP. Im concerned he corrupted something. I tried uninstalling and reinstalling the AOP but no luck. It works on my computer but not his? TechConnect said something about corrupting the aop core. My coworker did the first install and he was getting confused about zip files and the virtual machine we run rsl5k on. Maybe he broke it? any suggestions?- 5 replies
-
- 1734-aentr
- aop
-
(and 6 more)
Tagged with:
-
AOP installation broke module RSL5000
JustinSmith replied to JustinSmith's topic in Allen Bradley / Rockwell Automation
TechConnect fixed the corruption issue -
Trouble energizing my stop output with 5069 CompactLogix Studio 5000
JustinSmith replied to rotilahp's topic in Allen Bradley / Rockwell Automation
I started with slc. Also slc is older than I am. -
Run Powerflex 525 from keypad?
JustinSmith replied to RetiQlum's topic in Allen Bradley / Rockwell Automation
We like to add all of the specific parameters needed in the electrical drawings. I also like to keep a printout of all the parameters. https://rexel-cdn.com/Products/39E62596-1DCC-4029-9363-F11286CC741A/39E62596-1DCC-4029-9363-F11286CC741A.pdf -
http://www.infoplc.net/files/descargas/rockwell/infoPLC_net_hsc_quick_start.pdf
-
We had an issue with a password protected PLC and after contacting the OEM they provided the password that they forgot to remove. But stealing intellectual property is illegal so you may have to factory reset the PLC and remake the program.
-
SLC 5/03 rs232 connection problem
JustinSmith replied to JustinSmith's topic in Allen Bradley / Rockwell Automation
The Tripplite keyspan usb serial adapter + a null modem adapter for my serial cable -
I have an SLC 5/03 that Im trying to get the program from. I have a 1747-uic. Im not getting anything to show up in rslinx and I suspect the channel 0 is configured for ASCII because theres an HMI plugged into it. Also the rj45 connection is broken because someone used a crossover ethernet cable...lol. is my best bet to try and fix/replace the 1747-uic? I have an offline copy of a program from a different machine that uses a 'similar' setup and the CH.0 -System is configured for DF1 full duplex,19200,CRC and CH.0 - user is ASCII 19200 baud. Any Ideas? I was using the 3 wire db9 connector running from the HMI to the PLC. I unplugged it from the HMI and used it with the 1747, Should I use a standard DB9 cable with a null modem adapter?
-
SLC 5/03 rs232 connection problem
JustinSmith replied to JustinSmith's topic in Allen Bradley / Rockwell Automation
Thanks guys. I got the adapter in the mail and it worked right out of the box. I was about to start pulling whats left of my hair out! -
Have you tried contacting the OEM?
-
You would want to use serial communication. My only experience using the enet-adp is sending read requests from an IQ-R plc to the enet-adp.
-
can you give me the model #/name of the modules you have?
-
Micro850 failed whit the plug-in modules
JustinSmith replied to JPMerck's topic in Allen Bradley / Rockwell Automation
Click on the device tab of connected components workbench and select update firmware. -
Ford BMW Mercedes VW Tesla PLC Examples
JustinSmith replied to slinky's topic in For Sale, Employment, Services or Wanted
They use the same hardware as everyone else. Robots, plc, cameras, ect. Most of the vehicles are attached to a car/train like Bruce says. as it goes down the line robots perform steps of a program and report back to a PLC and sometimes a cognex camera will take a picture of your parts. -
Micro850 failed whit the plug-in modules
JustinSmith replied to JPMerck's topic in Allen Bradley / Rockwell Automation
Can you verify youre doing the steps starting at p25 of this manual? You can plug the module into any spot but you have to specify where in your project file. https://literature.rockwellautomation.com/idc/groups/literature/documents/qr/9328-qr001_-en-e.pdf -
SLC 5/03 rs232 connection problem
JustinSmith replied to JustinSmith's topic in Allen Bradley / Rockwell Automation
Channel 1 is set to dh485 and the indicator led slowly blinks, when I plug in the 1747-Uic to the port with a straight pass through cat5 cable the light continues to blink. On the 1747 the usb and dh485 lights occasionally blink but still nothing shows on rslinx -
SLC 5/03 rs232 connection problem
JustinSmith replied to JustinSmith's topic in Allen Bradley / Rockwell Automation
So Im looking at the project file from another machine that has a similar setup and Chan. 1 - System is DH+ at 57.6k Baud, Chan. 0 - System is DF1 Full Duplex, Chan. 0 - User is ASCII 19200 baud. thats a 5/04 cpu though. Our machine in question has a 5/03. I will try the DH485 connection today but Im pretty sure our 1747 converter is broken for dh485 -
SLC 5/03 rs232 connection problem
JustinSmith replied to JustinSmith's topic in Allen Bradley / Rockwell Automation
Thanks for the reply Mickey. I'll pick up a null modem cable tomorrow on the way to work. I'll post more info about our setup tomorrow. We got a 'new and better' laptop from IT with a smaller screen and no serial port haha. Should I buy a serial to usb converter? -
Micro850 failed whit the plug-in modules
JustinSmith replied to JPMerck's topic in Allen Bradley / Rockwell Automation
take a screenshot of your plugin module configuration. You need to make sure the locations match. -
Sorry I cant see your pictures due to the firewall on our network. Are you setting the communication settings on the first scan? http://www.inverter-plc.com/plc/FX_PLC/The%20FX-232ADP%20RS-232%20adapter%20module%20for%20FX%20PLCs.pdf
-
We used a photoeye to trigger a camera (sorry not allowed to go into too much detail). It then added the item to an array. I reccomend you figure out how many inches/cm or whatever of travel one revolution of your encoder is and then convert it to a ratio of 1. so say 1 encoder rev = 2 foot of item travel on the conveyor and your divert is 11 foot away from the photoeye you use to trigger the camera. so if you add your item to the array at 0.5 revs of the encoder then your item location is scan ratio + encoder revs. so you would divert at 5.5. We had an absolute encoder. converting it to a ratio of 1 makes the math way easier.
-
Im not an expert but please be more specific. data types are called devices. M device is a bit. D device is a word. T = timer. If you click the help tab and look in the manuals its all explained with pictures.
-
Wy back when, we used an array and sized it based on the max amount of items we could get loaded into the system + some overage then just pushed and popped to our stack. It was an array of structured data types so each item had the info we needed.
-
you could do a comparison of an int that has a value that ranges 0-2. Just make sure the sequence isnt messed up on a power cycle. Never used alpha 2 controllers