moltra
MrPLC Member-
Content count
57 -
Joined
-
Last visited
Posts posted by moltra
-
-
Anyone have any information on the Eagle Signal Controls Micro 190+ PLC, I have one installed at my plant and I do not know anything about it. -
Where does it layout the requirement for the testing of e-stops. I have read somplace that they should be tested daily, but I cannot remember where. TIA. Moltra -
I used a program called Resource tuner and got the following: (I blanked out the company Name If anyone wants it PM me) Length Of Struc: 033Ch Length Of Value: 0034h Type Of Struc: 0000h Info: VS_VERSION_INFO Signature: FEEF04BDh Struc Version: 1.0 File Version: 1.0.0.12 Product Version: 1.0.0.12 File Flags Mask: 0.63 File Flags: File OS: WINDOWS32 File Type: APP File SubType: UNKNOWN File Date: 00:00:00 00/00/0000 Struc has Child(ren). Size: 736 bytes. Child Type: StringFileInfo Language/Code Page: 1033/1200 CompanyName: * FileDescription: Beckhoff/Windows//H42a/H42a FileVersion: 1, 0, 0, 12 InternalName: BHWin LegalCopyright: Copyright © 2005 LegalTrademarks: OriginalFilename: BHWin.EXE ProductName: Beckhoff/Windows//H42a/H42a ProductVersion: 1, 0, 0, 12 Child Type: VarFileInfo Translation: 1033/1200 -
They both are specificly ran by the system when it starts. This is straight from the factory. and when they are ran it says PLC starting. the machines are from Germany Here is the bat file that starts the PLC. @echo off rem del c:\logs\logfile.old >>NUL rem ren c:\logs\logfile.txt logfile.old >>NUL sleep 5 start .\bhwin.exe start .\fkvisu.exe rem start .\ComInterface.exe rem start .\fk_debug.exe -
any Informationon this would be a great help -
yes that is what I am looking for. Thanks Mark -
With the changes in PPE required in NFPA 70E, I am looking for a 9 pin serial adapter, that I can mount in a control panel and connect to various types of PLCs. ie.. Micrologic 1200 connection with a 1761-CBL-PM02 connected to the inside of the outlet and then connecting a straight serial cable to the outside of the outlet. this will allow me to connec to the PLC without having to don all the PPE and open the cabinet door. Anyone ever use anything like this, or will I have to make my own. -
check out this webpage. http://www.moellerusa.net/content/support_...cal_notes.shtml -
I am working on a machine with a NT computer running some kind of PLC software. All the information I have is that when the PLC is started the following programs are started. bhwin.exe fkvisu.exe. Any help or information would be greatly appreciated. -
I agree this program was written by an engineering firm, I am just the fool who has to make sure the machine operates properly. If you look at the emulate file I am combining all the OTE into one are so there is only one instance of each OTE. Moltra -
As for the duplicate I/O look at: Searching through MainProgram - MainRoutine... Found: Rung 3, OTE, Operand 0: OTE(Drive1:O.ClearFault) Searching through MainProgram - Startup... Searching through fault_handling - fault_handling... Found: Rung 44, OTE, Operand 0: OTE(Drive1:O.ClearFault) ls1_Emulation.zip LoopSplitterOneUpgrade_V15.zip -
I am making some changes in a control logix PLC program that an engineering programmed for my company. In the program they have used the same I/O points in differnet tasks. I have noticed that some of them are overridding others and not letting the program operate as designed. I am trying to consolidate the I/O points so that there is only one instance of each I/O point in the program. I am trying to figure out if I should have a seperate I/O section or have all the I/O in the main program (routine/task). what has everyone else done when faced with this? -
I am trying to update the profibus GSD file on my system. Wonderware is controlling the profibus configuration. I have updated the profibus configuration with the new GSD file and it shows up if I add a new slave. But I need to get the existing slaves 2 ET200S I/O blocks on the new GSD files. I would like to do this without loosing all the configurations and setups of the installed modules. ie variable names and module settings. I hope that you can understand this. Thanks in advance Mark -
PV550 and PV600 plus -
WOW this thread exploded. Alot of good information in this thread. I do use manual buttons for start/stop the buttons that would be replace control things like height, tension, pressure, and speed of the machines. I want these on a PLC so that in the future I can add recipes and pull data like how many feet produced. -
Yesterday, I had to replace a PV550 with DF1 comms with a PV600 with DH485 due to "somehow" the screen being shatter. Right now I have 3 of my PVs on DH485 and one on Ethernet/IP. I am looking at replacing alot of the manual buttons on my machines with PLC and displays for controls for data collection purposes. But it is not cost effective to install a $1500 display to replace 6-10 buttons. I am also looking at acouple of small selfcontained Display/PLC to run these machines. I will look at the maple-system products. -
To save company money!!!!! -
I am looking for a good quality low cost replacement for allen-bradley Panelviews. Any ideas? Mark -
What this means is that you have to use your voltage tester on a known energized source of the sample voltage (scale on the meter). this verifies that he voltmeter is working properly. I have had meters fail and read a lower voltage than was actually there and I shut down the whole plant, trying to minimize undervoltage damage to the machines. We checked the voltage with a different meter and everything was correct voltage. The checks that has to be done to make sure that the machine is electrically dead with a multimeter only apply to someone working directly on the circuit. For a mechanic verifiication of the machine not working. Trying to start is all he has to do. -
Has anyone had any bad experienced with "Worldwide Electric Motors". I would appreciate any in that you guys can give me on there reliability. Moltra -
I am trying to design and build a small system that wll be SLC controlled via a panelview. There is 2 VFD that will be controlled from the panelview. I am currently looking at a SLC 5/04, Panelview 1000, PF 4 2hp 480VAC, PF 70 7.5hp 480VAC. I cannot figure which is the most effienct way to connect them all together. I am looking at both the cost and easy of programming and construction. I also need to be able to connect to the PLC with my laptop without having to disconnect anything. I would appreciate any and all help you can give me. -
I have been looking for that doc for 2 days LOL forgot the 2 connections on the SLC 5/04. Thanks -
I am designing a system with a SLC 5/04 processor which I will be connecting to a Panelview 1000 Via DH+. Connected to the RS-232 port will be a 22-SCM-232 serial converter that is connected to a Powerflex 4 and powerflex 70 drives. What I need to know is, is there a way to connect to the SLC 5/04 via DH+ without disconnecting either the panelview or the serial converter. -
Does anyone know of library of images that can be used when designing displays on panel views or other display devices?
allen-bradley document library translation
in Allen Bradley / Rockwell Automation
Posted