Posted 31 Oct 2019 Hello everyone, I have a problem with packing machine. There are some issues with one of the axis, when axis actual position is near to 1800000 some error appear and operator has to turn off machine on main contactor. This axis is working in Linear mode. I think that rotary mode would be better for this axis. And here is my question. Which instructions, and what options i should change/check when i change count mode in axis's options. Can any1 point me some manuals to read or give me some advice ? Thank you in advance. Share this post Link to post Share on other sites
Posted 31 Oct 2019 Select Rotary Mode and then set the min and max as shown below: The 0 and 360 would represent a rotary axis such as a turntable. Share this post Link to post Share on other sites
Posted 7 Nov 2019 Thank you for answer. I've got another question, is it possible to set actual position of an servo axis ? MC_SetPosition can set only command current position. Share this post Link to post Share on other sites
Posted 7 Nov 2019 (edited) Yes you can. In this example, I'm setting Home with an offset at position 3185. Edited 7 Nov 2019 by IO_Rack Share this post Link to post Share on other sites
Posted 7 Nov 2019 It must be done while GearIn command is executed and Axis is moving. Share this post Link to post Share on other sites