Posted 14 Jul 2006 (edited) Can someone give me some hints how can I establish communication through the PC rs232 port and a C200H-LK201 V1 module mounted on the backplane rack of a PLC C200HX CPU44. I need to upload plc program using CX-programmer to monitor and edit online the program. (Available CPU rs232 ports are already occupied so the alternative was the C200H-LK201) I have cable C500-CN221-EU but I don't know the setting for the CX-programmer and C200H-LK201 module. Thanks in advance for any help given. Edited 14 Jul 2006 by dg01 Share this post Link to post Share on other sites
Posted 15 Jul 2006 Here is a link to the manual for the C200H-LK201. You will need to set the rotary switches on the front correctly. Also, check the cable diagram in the manual. C-Series Rack Mount Host Link Module Manual Hope this will help. Share this post Link to post Share on other sites
Posted 15 Jul 2006 Check out the cable and the switch settings. Then use Auto On-Line with CX programmer. C200H_LK201_and_RS232_comm_with_LSS__and_SCADA_.pdf Share this post Link to post Share on other sites
Posted 21 Oct 2015 And 9 years later, this same situation has risen again. The "C-Series Rack Mount Host Link Module Manual" link isn't available. Can someone repost another link? Thanks!!!! Share this post Link to post Share on other sites
Posted 21 Oct 2015 It's in the Download section of this forum, http://forums.mrplc.com/index.php?app=downloads&showfile=954 Share this post Link to post Share on other sites