NT8 - cable connection

[Miros 0]

Hi people! Please, help me to find drawing of cable for connection NT8 to computer for downloading the programm!!!

[PdL 71]

NT8 !? Don't you mean NS8 ? Anyway, make a cable C200H - CN229 - EU using the pinout on page 13 of Omron Serial cables @ MrPLC.com

[Miros 0]

May be I made mistake, I mean monochrome two-row display with buttons! Thank you, I'll try!

[PdL 71]

You probably mean NT2S... But the cable will work.

[Miros 0]

And what is the model of little black&white touch screen panel? This cable will work with it? Edited 24 May 2005 by Miros

[OIDMBTRTECH 0]

The panel shown is an NT2S-121 OR 122 depending on how it is powered. The C200H-CN229-EU will work just fine to program or retreive the program. The unit just needs to be powered. If it is a -122 it will need to be connected to a PLC for power.

[Dramesh_babu 0]

Hai, If NT2S-SF121,use PC NT2S-SF121/122 2 2 3 3 5 5 will work. If NT2S-SF122B,U need to connect MMI(Male Port) with PLC thro NT2S-CN222 & Use local RS232 cable in another MMI female port for Programming/retrieving. nt2s.pdf

[PdL 71]

Now you're talking about a touchscreen Anyway, the cable will work.