Communication with Wago I/O 765-4502/100-000

[Mr Rabbit 1]

Dear forum members,

I am trying to establish communication between Rockwell Studio 5000 and Wago I/O System 765-4502/100-00. I am using the provided EDS file.

The Wago I/O System 765-4502/100-000 is recognized but indicates a pulsating communication error in the path.

Are there members who have already used this Wago I/O 765-4502/100-000 in an application and may have advice to setup communication and device?

Thank you in advance for your time.

Best regards,
Mr Rabbit

 

[BobLfoot 302]

@Mr Rabbit welcome to the mrplc forums.  

Could you post more information about the error you are receiving?

Most ethernet devices when you open their propoerties in Studio 5000 and goto the communicastion tab will show you error text and/or an error number.

[pturmel 160]

Also post:

• The PLC IP address & subnet
• The Wago IP address & subnet
• The RPI you chose
• The EDS file
• Screenshots of the device tabs in Studio 5000.

[Mr Rabbit 1]

Hi BobLfoot, pturmel

Thankx for the Quick response!

The communication between Wago IO Link Master and Rockwell PLC is OK now.

Kind Regards

Mr Rabbit