Posted 15 Nov 2023 Hi. I'm looking for a way to display on an Omron NB7W HMI, the elapsed time that a machine runs for. So if a machine runs for 6hr 32 minutes the display will be "6:32" It sounds simple but i must be missing something. Can anypne help please?Kind RegardsPaul Share this post Link to post Share on other sites
Posted 15 Nov 2023 You'll have to use 2 variables and place a ":" in between them. Share this post Link to post Share on other sites
Posted 16 Nov 2023 Each referencing a counter/timer on the PLC or is there something built into the NB? Share this post Link to post Share on other sites
Posted 16 Nov 2023 1 hour ago, Paulmac said: Each referencing a counter/timer on the PLC or is there something built into the NB? Yes, each reference a timer/counter/variable. You will likely need to do some pre-formatting/scaling of the values in the PLC as the NB only accepts elementary data types. Share this post Link to post Share on other sites
Posted 18 Nov 2023 I'll try this as soon as i can. Thank you Share this post Link to post Share on other sites
