Posted 20 Jun 2022 Currently have a A1SJ71E71-B2-S3 in the system for coaxial (thin) ethernet (10BASE-2), it's connected to a conversion module for TP-cable and from that then to a PC with plain TP network card. I was thinking about getting an A1SJ71E71N3-T to replace it and that way get rid of the converter from coax to TP. I wonder if it's possible to just have it hooked directly to the computer without hub - if I need a hub there's really no point in swapping - as there's still another thing between the computer and the PLC system that can cause problems. I was looking through the manual at mitsubiSIH.com and they seem to think they are connected to large nets with a bunch of hubs, PLC systems and computers. Appreciate thoughts and help. Share this post Link to post Share on other sites
Posted 20 Jun 2022 (edited) You can connect it with just a cable but you will need an ethernet cross cable. I doubt the older ones have switching. But the AnS series is no longer supported. you should think about upgrading to an system Q or iQ-R (maybe FX5) https://www.cables-solutions.com/difference-between-straight-through-and-crossover-cable.html Edited 20 Jun 2022 by Gambit Share this post Link to post Share on other sites