Trying to write 8k+ bytes to a Zebra ZE500 printer using socket write

[nspr2195 0]

Hi All,

 

I am trying to write 4k to 8k+ bytes of barcode data to a external Zebra ZE500 printer, but I am getting 16#0006 error on message instruction

and I need to send data only using one socket can't use multiple sockets and barcode data less that 3900 bytes are going thru good

using L83E 32.11, EN2T 11.001, PLC and Printer are on same subnet, 

 

attached is my message config screenshot,

 

Can someone help me with any solution.

 

[pturmel 160]

Modern logix protocol buffers top out at 4000 bytes.  You'll need to use two messages (same socket).