nspr2195

Hi All,   I am trying to write 4k to 8k+ bytes of barcode data to a external Zebra ZE500 printer, but I am getting 16#0006 error on message instruction and I need to send data only using one socket can't use multiple sockets and barcode data less that 3900 bytes are going thru good using L83E 32.11, EN2T 11.001, PLC and Printer are on same subnet,    attached is my message config screenshot,   Can someone help me with any solution.  

Hi all, i just need to clarify that can we use GTSoftGOT2000 to work with QnACPU. i am describing my situation below. We have a vendor asking asking us to install a Large Screen where a operator can see the images of the faulty parts with respective of what part they run(we run almost 14 parts on one machine). the largest HMI that i was able to find was a 19inch one from Pro-Face, but thats not sufficient . so got and idea of using GTSoftGOT2000 and create a HMI screen and connect it to a PC Monitor. and do a slide show of pictures of faulty parts of a specific model of what they run. 

Hi all, i just need to clarify that can we use GTSoftGOT2000 to work with QnACPU. i am describing my situation below. We have a vendor asking asking us to install a Large Screen where a operator can see the images of the faulty parts with respective of what part they run(we run almost 14 parts on one machine). the largest HMI that i was able to find was a 19inch one from Pro-Face, but thats not sufficient . so got and idea of using GTSoftGOT2000 and create a HMI screen and connect it to a PC Moniter.