Posted 17 Mar 2005 I would like to make copies of current logic in all my 5/03 processors, when I go online I can see all the bit descriptions and all the ladder names, but if I upload the logic to laptop to make copy there are no descriptions. any ideas ? Thanks 98 os Rs logix 500 6.3 Share this post Link to post Share on other sites
Posted 17 Mar 2005 (edited) When you go on line, just save the program. You now have a copy of what's running in the PLC, with the comments. Note: You will get a message about updating tables, that is something you will have to decide, on case by case basis. Edited 17 Mar 2005 by Ken Moore Share this post Link to post Share on other sites
Posted 18 Mar 2005 As Ken says, just save the file when you are online. But if you want to upload (which is no different from saving online) then choose the "use file" option. The comments are stored in the file on the computer and not the PLC. Saving whilst online just copies the program from the PLC and then saves it along with the comments to the file name you specify. Share this post Link to post Share on other sites