Comments are lost in "Transfer From" during sync

[Megoof 0]

Hello All,

I am having a small issue that I hope has an easy solution. Whenever I plug into another project and try to "Transfer From" during sync, my NX102-9020 says that the PLC does not have comment information and cannot be restored. Is there some setting on Sysmac Studio that needs to be checked so I can pull the comments from the PLC? Any help is appreciated. 

 

Thanks

[Nate Hammersmith 1]

We Found it. It was on the PLC icon under property. "Do not transfer the POUs comments to the PLC" was checked. We un-checked it and the comments transfered to the PLC like they should.