Posted 5 Oct 2017 Hello, I am working with e5cc-t programs, for heating application. I need to find a way, to start program, when temperature reaches set-point of first (no. 0) segment. I think that, there should be some kind of setting, but i cant found it.. I've done this with PLC, but this is not an solution for this application. in conclusion: After program starts, it has to reach set point temp, and then hold temperature for certain time. 1 person likes this Share this post Link to post Share on other sites
Posted 6 Oct 2017 Segment 0 would need to be a RAMP segment to your desired setpoint. Next segment would be a SOAK segment. Enable the Wait function and set a Wait band. The program will not move on to the next segment until the temperature is within the set point +/- the Wait band. Do you have the H185 manual? This is the manual for the E5_C-T controller and explains all the parameters. Hope this will help. 1 person likes this Share this post Link to post Share on other sites