Posted 22 Sep 2015 Hello, First of all, Hello to all members. Im From Portugal. I trying to help my dad. I Have a Omron CJ1M-CPU11 with a program running that works fine... Now i need to transfer this program to a CJ1M-CPU13. I started to download from CJ1M-CPU11 to a file... them im running the Cx-programer on the CJ1M-CPU13, connection its ok, but when i try to transfer i get this error : The connect PLC type : CJ1M-CPU11 The Project PLC type : CJ1M-CPU13 Its possible to convert ? Please Help. Please view in attached file. Thanks Share this post Link to post Share on other sites
Posted 22 Sep 2015 This a very simpe procedure: 1. Right-click in the project workspace where it says NewPLC(CJ1M) 2. Select change 3. Select the first settings button 4, Change the CPU type to CPU13. 5. Click OK. 6. A dialog box will ask you to convert the program 7. Click OK 8. Download the program Share this post Link to post Share on other sites
Posted 22 Sep 2015 With CX-Programmer offline, double click on the PLC, choose settings next to device type, then change CPU type from CPU11 to CPU13. Press OK. (See drawing below): Then this window will appear: Press yes. Save project with new name and download as normal. I see that Jay responded as I was typing up my response... Share this post Link to post Share on other sites