Posted 1 May 2014 Hello everyone. I have a little problem with making a program on Codesys with timers. When i start the program and switch on the I1 button the signal is detected on e output, but it is not detected on q1 output. Those outputs are connected directly to one line. I attached file with this program into this topic. Does anyone can tell me why this look like it and how to fix it? I changed the extenison from *.prg to *.bmp. czasproste.bmp Share this post Link to post Share on other sites
Posted 2 May 2014 (edited) You have q1 as an output on two networks. The first q1 is over-ridden by the second q1. Try this: CoDeSysTimer.bmp Edited 2 May 2014 by Veganic 1 person likes this Share this post Link to post Share on other sites