QX41 Connector ?

[brettshelley 0]

Hi Guys, I made a boob boob when I ordered my Q PLC Input module!!!! It's the QX41 but failed to order the 40 Pin Connector!! To get this from my supplier would take a week at least he said. Is there a similar connector I could use???? Praying for help here!!!! Cheers Brett 197e.pdf

[kaare_t 155]

Well, according to your own document you would need any of the part numbers in the attached picture. I just googled and you can order from pretty much where you want in the world... It's a Fujitsu connector (again, google is your friend).

[Crossbow 297]

There are also terminal block and cable solutions from Mitsubishi instead of having to make your own connector.

[brettshelley 0]

Thanks for the replies... Problem is that it will take too long for my supplier to fly in for me. Is this a standard connector I can buy locally or do I have to get from Mitsubishi?? Cheers

[kaare_t 155]

As mentioned it is a Fujitsu connector, so you can probably find a standard connector by looking at the Mitsubishi spec with pinouts and dimensions and compare it to a standard connector.

[brettshelley 0]

Just to let you guys know that my supplier found the cable and all working!! Thanks for the help Cheers, Brett