MRZJW3-SETUP161, no communication between PC...frustrating

[happytriger2000 0]

I'm getting a prompt saying no communication between the MRJ2S and PC after clicking "Read all" in Parameter list in MRZJW3-SETUP161, at 1st I thought it was the PCI RSR232 card UT420 (UPTECH) wasn't working, then I added another PCI-E RS232 card to PC and connect the MR-CPCATCBL3M from MRJ2S-40A CN3 to the new PCI-E RS232 com3, still getting the same message, what is the problem? I changed the baud rate of both 2 x RS232 port com 3 & 4 and the SETUP161 -->system--->system settings. Do I need to change Pr setting at MRJ2S before proceeding to PC connection? please help.

[Crossbow 297]

Are you running a version of Windows which supports SETUP161? You should not have to change anything in the servo parameters to read from them.

[happytriger2000 0]

The PC is running XP pro. Here is a short clip of the problem: http://youtu.be/-Z6NEFfftPM