Mitsubishi Analogue Input & Output programming

[sttchui 1]

MY plc CONFIGURATION RACK 1 Q02HCPU QX40 X0-XF QX40 X10-X1F QX40 X20-X2F QX40 X30-X3F QX40 X40-X4F Q68ADI X/Y50-X/Y5F Q68ADI X/Y60-X/Y6F RACK 2 QY10 Y100-Y10F QY10 Y110-Y11F QY10 Y120-Y12F QY10 Y130-Y13F Q64DAI X/Y140-X/Y14F CAn anyone help me to understand how to program the mitusbishi analogue input & output? For analogue input 1st analogue input- 8 channle x50 ||---[TO H0 K5 H8 K1] H0? ALL CHANNEL ON??? K5 -SLOT NO 5 H8? K1 -16BIT X60 ||---[FROM H0 K11 D1000 K1] H0? K11 -CHANNEL 1 D1000 -STORE ANALOGUE DATA K1 -16BIT SET Y59 2nd analogue input- 3 channel ||---[TO H0 K6 H3 K1] H0? ALL CHANNEL ON??? K6 -SLOT NO 6 H3? K1 -16BIT ||---[FROM H0 K21 D1010 K1] H0? K21 -CHANNEL 1 D1010 -STORE ANALOGUE DATA K1 -16BIT SET Y69 for analogue output 1st analogue output- 1 channel X140 ||---[TO H0 K1 D900 K2] SET Y141 H0? ALL CHANNLE ON?? K1 -CHANNEL 1?? D900 -STORE ANALOGUE DATA K2 -32BIT( FOR 2 CHANNEL) SET Y141 AM I PROGRAMMING IT CORRECTLY?? ANY TIPS & HELP ARE WELCOME

[Crossbow 297]

The information you require is shown in an example program in the manual. Keep in mind you can also use the GX Configurator software and not need to write the code.