Printer connected to NS screen

[Sleepy Wombat 27]

going back around 5 yr ago, I installed a system with an NS touch screen. Back then, I could, and did connect directly a CANNON PIXMA IP3000 printer to the USB port on the screen. So when an operator wants to, he can press a button on a screen and print the current screen. This has being working for the last 5 years. However, i believe that the printer might have finally given up. Does any one know if the CANNON IP3600 is a suitable replacement ? I would appreciate a heads up. Thanks Sleepy..

[Yair 2]

1) By installing NS system version 8 or higher any printer with PICBRIGE might be a suitable replacement. Also the USB CABLE A-B should be replace to B-B 2) An other option is to install 2G memory card in NS change the printing target to memory card .($sw) up to 999 bmp files might be saved The user can print the picture or just save them in hard disk by using FTP server (this could done with Ethernet). If NS hasn't Ethernet you may use 2 memory card also a memory card extension could be use