New to Mitusubishi

[Bob O 8]

I have been asked to go online and trouble shoot a machine that has a Mitsubishi Melsec FX ON- 40MR-ES. I mainly work with AB so this one is new to me. I searched for information but came up short. Any pointers on needed software, cables and manuals is appreciated. Thanks, Bob O

[kaare_t 155]

Hi! You would need a software, and since you're located in the U.S. it's probably GX Developer you will need (or the new iQ Works which includes GX Works) as software. You will also need a programming cable for the PLC, and since you have an FX0N you'll need an SC09 cable (red). You can get this at your local Mitsubishi dealer or you can check out Ebay for SC09s..... Manuals ++++ can be found in Mitsubishi Electric Automation USA: http://www.meau.com Let us know if you need anything else

[Crossbow 297]

Can use the lower cost lite version of GX Developer, which only programs FX family. GX-DEV-FX-C1 for a single user SC09 for a serial cable FX-USB-AW for a USB cable Manuals are all at www.meau.com in the Downloads section.

[Bob O 8]

Thanks now if the local "Rep" would call back I could get prices.

[Crossbow 297]

Where are you located? I might know someone? PM me if you prefer.