Barcode for A956WGot

[namlong78 0]

Hi There, One question need to ask: Can A956Wgot panel can read data from barcode scanner thru his rs232 port? If yes, so any configuration need to install? Wait for reply soon... Rgds, Long.

[Crossbow 297]

The A900 manuals cover bar code function in depth. I would start there. I've only worked with the A985, not the A956, but it should support it.

[namlong78 0]

Hi Crossbow, Thank you for reply me. In the A900 manuals, they said that it is can but i try all most the case but it can not read . Let me describe in detail: My system include plc A1shcpu motion control connect to A956wgot via RS422. I declare D100 plc device for reading signal 1, D101 for writting signal 2. I use barcode AT10Q-HM connect to panel's rs 232 and observe the change in b6 of D101 whether it turn to 1 when i scan the barcode. Step1- I install the extend OS driver for barcode but nothing happen. step2-check the b5 of D100 ( barcode function invalid) is 0 or not, it is 0. Check the bit6 of D100 ( barcode reading complete), it is 0. step3-Try to install to replace all other barcode driver, it is the same. step4-Install new version Rom-bios to 9.4.0[X], it is the same ( the old version is 9.1.4[V]) step5-Install new Os ver 9.8.7 and alternative install the xtend barcode driver, it is not change. ( driver version 9.0.0) one question need to be advise that: the barcode driver is common for printer, barcode, keyboard or I/O, Is it need to declare the option device is barcode? where to declare? The barcode, it is can read with got1000 panel. Waiting your advise, Long. PS: Can you send me the A900series connection manuals in english, Did you have it?

[namlong78 0]

Hi, Nobody help me . Can anybody confirm to me it is yes or no if barcode can connect to A900 series so i don't lost much time with this? Any special setting to barcode? communication speed? parity check or not? how many bit per data? how may stop bit it should be? I found that for A900 series I found noplace to set this to barcode, we can not set what is header, terminater should be to barcode. But for Got1000 I can do this Rgds, Namlong782004