namlong78

Create new black project with same type op PLC Copy MAIN.wpg from error project to new project which is same directory POU/body

Hi, Nobody help me . Can anybody confirm to me it is yes or no if barcode can connect to A900 series so i don't lost much time with this? Any special setting to barcode? communication speed? parity check or not? how many bit per data? how may stop bit it should be? I found that for A900 series I found noplace to set this to barcode, we can not set what is header, terminater should be to barcode. But for Got1000 I can do this Rgds, Namlong782004

Hi Crossbow, Thank you for reply me. In the A900 manuals, they said that it is can but i try all most the case but it can not read . Let me describe in detail: My system include plc A1shcpu motion control connect to A956wgot via RS422. I declare D100 plc device for reading signal 1, D101 for writting signal 2. I use barcode AT10Q-HM connect to panel's rs 232 and observe the change in b6 of D101 whether it turn to 1 when i scan the barcode. Step1- I install the extend OS driver for barcode but nothing happen. step2-check the b5 of D100 ( barcode function invalid) is 0 or not, it is 0. Check the bit6 of D100 ( barcode reading complete), it is 0. step3-Try to install to replace all other barcode driver, it is the same. step4-Install new version Rom-bios to 9.4.0[X], it is the same ( the old version is 9.1.4[V]) step5-Install new Os ver 9.8.7 and alternative install the xtend barcode driver, it is not change. ( driver version 9.0.0) one question need to be advise that: the barcode driver is common for printer, barcode, keyboard or I/O, Is it need to declare the option device is barcode? where to declare? The barcode, it is can read with got1000 panel. Waiting your advise, Long. PS: Can you send me the A900series connection manuals in english, Did you have it?

Hi There, One question need to ask: Can A956Wgot panel can read data from barcode scanner thru his rs232 port? If yes, so any configuration need to install? Wait for reply soon... Rgds, Long.

I already find it . http://www.omron.ca/DocumentLibrary.asp But is it impossible to change from Japanese to English?????? Thnk for all help. Namlong78

The series of Xpectia is FZ2-30_ , But the series I currently using is FZ-30_ ( lack of No. 2). I do not know that it is the same or not?

I can not find any FZ300 series in there, or they are the same? Rgds, Namlong78

Anyone here have the English manuals or documents related for FZ300 omron vision sensor touchscreen? I have bit difficult in japanese language Thanks for all help