timer problem

[markysparky 0]

hi guys i wonder if anyone can help me i,m trying to write a bit of program in medoc or gx developer to use a timer off delay what i want to do is XO to open a gate with a sheet of paper and the gate to stay open for a set lenght of time after XO has been uncovered with the tail end of the sheet for say 3seconds then close again thanks in advance would be very grateful for any help

[Veganic 8]

See section 4.6.2 "Switch off delay" of the FX Family beginners manual Article no. 166388 on the Mitsubishi website. http://78.136.49.242/branch/database/servi...pd1cvf6qc2fsis3 Edited 14 Feb 2009 by Veganic

[markysparky 0]

this was perfect for my application thanks alot mate

[Crossbow 295]

I put a program in the Downloads section here years ago that showed all types of timers in Mitsubishi PLCs. It had on-delay, off-delay, one-shot, pulse, flip-flop, etc. Did you look there?