GX Developer over network?

[Dave46 0]

hi I am trying to get GX Developer to connect to ENET module on FX3U rack over WAN I have tried port mapping to the IP of the ENET on 6004 & 1281 does anyone know what port I should be using to connect to the ENET module, is it the Transmission Target port setting in the FX Configurator? thanks

[Crossbow 297]

You should only have to make sure that one of the 8 connection channels is set to TCP Melsoft Connection.

[funfrok 0]

Melsoft connection port number for FX3U is 5551. You should port forward TCP port 5551 to PLC.

[ETR Automazione srl 0]

with this port i work in SSH in tele service with FX3U over internet... Check also the configuration of the module. Bye