Posted 5 May 2008 Hello, I have a job that i am installing a plc to replace some old controlle cards that are not suppported by the oem any more,but it also has a melsec plc f1-20mr that i would like to leave, but need cable to do some programe edits, but can't find any info on cable. any info (pinout/were i mite be able to buy one) thanks for taking the time read. Share this post Link to post Share on other sites
Posted 6 May 2008 You need a F2-20GF1 and a SC02N cable. Don't think you can buy them anymore though Share this post Link to post Share on other sites
Posted 6 May 2008 Roscho The original cable for the "F" series P.L.C. was the SC-03. But the SC-09 can also be used which is the one that is available today from your local distributor. However you ask for pinouts it is not just a simple cable it is a converter as well. What you will also require and which is no longer available is a F2-20GF1 interface unit. You may be lucky if your distributor may lend you one. Good Luck Rodney Share this post Link to post Share on other sites
Posted 6 May 2008 I found one!!!!!!!! thanks for the help. Share this post Link to post Share on other sites