Sysbus Wired Remote I/O

[gtsuport 61]

Good Morning All, I have a customer installing a CS1 with Sysbus Wired Remote I/O (C200H-RM201, etc.) in mainland China. Omron recommended cable is Belden #9271 or #9841, generic description is VTCF 2 conductor x 0.75mm (JIS). Customer can not find that cable. My question, would anyone have a cable number that might be available in China that will do the job. I would like something that someone has used successfully. (Thinking maybe BobB or Sleepy may have been through this before). Thanks, gtsuport

[BobB 58]

I just use either 0.75 or 0.5 sq mm twisted pair screened cable rated at least at 240VAC for the insulation. It is usually running with all sorts of power cables etc - you know the routiine - cable tray is full - no where else to run the cable. Just ground the screen at the PLC end. Have never had a problem. Cannot afford Belden by the way. OUCH!!!!!

[gtsuport 61]

Very helpful! I will pass that along to the customer. Thank you BobB!