Search the Community

Showing results for tags 'word/dword'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Found 21 results

  1. Dword to Float on FX3GE

    Hello! I have a float number (HEX: 3CA01D0F) in Big Endian. It's 0.0195451062. I get it from the sensor and store it in a double word variable. Could you help me? How can I convert DWord to Float? If i use DFLT instruction, It treats DWord as an integer (1017126159) and just gives me 1.017126 e+009 Thanks in advance.
  2. Hi:         How to use data type Word to perform math function without converting to Int or Uint ?  -----> Error    26    The '+' operator is not supported by WORD data type.     thanks    
  3. Union

    Hello! I am trying to get hold of the bits in a word, i have read that union is the way to go. My problem is that i cant figure out how union works. I have made a union between a word (16bit) and an array(0...15). The way I understood this was that the word now automaticly updates the array so that when the least significant bit in the word should update array[00] and so on. This is not happening. When I monitor the variables I can see the word change, but nothing happens with the array. Have I misunderstood the consept and what should I do to get hold of the bits?
  4. CONVERT CTUD TO DWORD

    Hello i have some problem, i am noobs with the mitshubishi plc, i need convert the output value from a ctud to a DWORD, i use word_to_dword to convert, but when i compile it have a errror. Type mismatch on output variable, i add screenshot.
  5. Hello, I'm new to CX-Programming and I could really use your help. I want to make function block that will check the bit status from a word input variable. I made input variable and internal variable array of bool(32) and I thought I can just use the code example: array[1]:=word.1 etc... but it is not allowed in CX-programmer. My goal is rearranging  the bits status from the input word to the output word. I don't need just making the 0 to 1 or otherwise... Thank you in advance.
  6. I'm working on simple structured text program which takes in DWORD values, does some math on them and then outputs in DWORD type. What data type should I be using and how can I make this work?  This is one of the lines from the code(everything DWORD) and I get 'operator not supported by DWORD data type' XPos3 := XPos1 + (2*XIncrement);  
  7. Hi, I am trying to convert a variable of REAL data type to DWORD. I 've tried using Real_To_Dword function which works fine if the real number is integer but when the real is decimal the function rounds the decimal number to INT first (I ve also read it in the instruction manual so no surprise here). I 've also tried experimenting with the function CopyRealToDWORD but again the outcome was not what I expected. Is there another way to convert decimal real numbers to DWORD without losing the decimal portion?
  8. Hello, CJ2M CPU-32 to IAI motion controller through ethernet/ip I'm working on programming electric actuators to pick up parts from a tray. I will have x (row) and y (column) coordinates that I need to update to move the actuators. So to go through the whole tray I would have to use nested loops. (below what i'm trying to achieve if i was doing it in C++)                                           6 Rows and 6 Columns, palettizing                                           data rows&columns DWORD (Row1,row2,row3...row6; col1,col2...col6)                                           c++ code                                           for i=0,i++,i<6;                                               rowData = row                                               for i=0,i++,i<6;                                                   colData = col                                                   execute movement                                                   wait for confirmation                                               end                                           end I have a way of doing it but it will require a lot of repetitive lines and typing every step, and I was wondering if there is a way on every iteration to increment the data location instead of the contents. In the picture below you can see the example where the goal is to copy data from D8100 to D8000, then in next step from D8102 to D8000, then from D8104 to D8000 and so on. So far in the documentation I was only able to find how to increment contents. Is it even possible to do what I want to?
  9. I am having problem converting a DWORD variable to a floating point decimal.  I've tried using the DWORD_TO_REAL function. Having the hex value "41E9B814" as an input I was expecting to get "29.2148819" as an output. However, I'm getting "1.110194.." as the output. Any ideas?    
  10. Greetings, so i create project for FX3U in GX Works2. In my program i use function in ST. That function return array with word(signed). I have a warning: ST FOR i_var := 0 TO n_i BY 1 DO TempNumbs := Numbs; TempDevSetsOnPerTime := DevSetsOnPerTime; QueueBySetOn[i_var] := 0; END_FOR; QueueBySetOn[1] := TempNumbs[n_i]; QueueBySetOn[3] := 1; FOR i_var := 0 TO n_i BY 1 DO IF (TempDevSetsOnPerTime[TempNumbs[i_var]] < MaxSetsOnPerTime) THEN QueueBySetOn[0] := TempNumbs[i_var]; QueueBySetOn[3] := 0; EXIT; END_IF; END_FOR; So, it realy funny, GXW cant return int? QueueBySetOn.gxw
  11. Remote IO

    Hi friends , recently i ve been doing some diggings about remote IO cards, in my factory we have a CJ2m PLC and it communicates with remote IO cards with four numbered words (2080.00 , 2080.01, 2080.02....2080.15 ) and there were several dip switches on the IO cards, which were set but i can't understand what was the basis of that settings. So I'd like to know how these dip switches behave and what are the uses of them ?? and how is it possible to have 4 numbered word bits ?? pls help me someone to clarify this, i tried internet, but cudnt help myself !!!  thank you    Here I attach one of the pictures i took of one of the remote input cards.
  12. Hi, I have variable (named var1) with data type 'Word[Unsigned]/Bit String [16-bit]' with Array [0..7]. I want to put 16 variables with data type 'bit' in var1. Is there function for that? Also is it possible to put 16 variables (bit) like this: var1[0].0:=bit1; var1[0].1:=bit2 etc. I'm using GX Works 2 with CPU L02 Best Regards
  13. Hi, I have variable (named var1) with data type 'Word[Unsigned]/Bit String [16-bit]' with Array [0..7]. I want to put 16 variables with data type 'bit' in var1. Is there function for that? Also is it possible to put 16 variables (bit) like this: var1[0].0:=bit1; var1[0].1:=bit2 etc. I'm using GX Works 2 with CPU L02 Best Regards
  14. Hi I am having trouble programming something I thought would be simple. I am using Word Lamp to display 6 different images ie. 6 states.  I have 5 Command Buttons. When pressed each one causes a different image to be loaded . What I want is the 6th image to display when the command buttons are released and before they are pressed. Unlike Bit Button which has a momentary setting , Command Button can only set a state. I wish it had a momentary feature so the state value could  be set when pressed and return to 0 when released. I hope I am being clear with what my issue is .  Any help with this would be greatly appreciated. Jim
  15. Hi, I am using syswin and i am doing an exercise on saving and moving data. My challenge is am monitoring temperature from a sensor and the range is -20'C to 100'C from the 4-20mA sensor, after conversion and testing for positive and negative the values are stored in D205. (I have done the conversion and testing for positive and negative values only assigning of bit 15 in D205 is left) The simple program has to turn on Bit 15 if the value is supposed to be negative. 1000 0000 0000 0001, a simple approach to telling us this is -1’C.  0000 0000 0000 0001, is telling us this is 1’C. Bit 15 is going to be our Sign Flag, so we have to ensure that if the temperature is positive then  Bit 15 = 0, how can we do this make Bit 15 of D205 = 0? If the temperature is negative then  Bit 15 = 1, how can we do this make Bit 15 of D205 = 1? How can i turn on this bit inside a data word? for negative i thought i could just add #8000 to the values after conversion then storing in D205 but for positive values how do i ensure that bit 15 is 0? How could you approach this? Am a bit stuck, all thoughts and ideas are much appreciated if possible you could add a snapshot from syswin or cx-programmer. I have attached the WTANK.SWP file which can be opened in syswin or cx-programmer. Look in block Main 8 Temp Buffer, Network 3 Convert to 'C WTANK.SWP
  16. PF 525 "Pos Redefine"

    Hi Everyone, I have a PowerFlex 525, in Velocity Mode with a Encoder Card "25-ENC-1". We are controlling this drive via TCP/IP with a 1769-L32. Through the PLC if I try to toggle the Bit for "Pos Redefine" in A560 [Enh Control Word] it instantly turns back to 0. But through the Parameter List Editor I am able to toggle A560. For My function I need to have the drive in Velocity Mode, If I change the drive to Position Mode I am able to toggle "Pos Redefine"   Any Thoughts would be great      
  17. I have 14 alarms all addressed to word 200 i.e. 200.** and i want to monitor the state of bits in word 200 such that if one of them is on the coil 204.00 should turn on (Currently i am using the OR operator to turn on bit 204.00 but the task is to use a single instruction to monitor the sate of the 16 bits of a word by comparing it to an integer say #0). I was thinking of using compare to achieve this but i do not know how to compare a word say 200 to a an integer value #0 such that if DW200>#0 then 204.00=on. How can i achieve this and what instruction can i use, am new to omron plc's and am using syswin 3.4 and plc CPM2A. Any help or sample program to achieve the above is deeply appreciated.
  18. OR Word AND Word application

    Hi Im relatively new to PLC programming and focusing mainly on Siemens PLCs.  Can someone give me an example or why one would want to use OR Word (OW) and AND Word (AW).  I understand that this means it is combining the contents of accu1 and accu2.  But why would you want to OR/AND them. Thanks
  19. PAROCK1 for HMI/SCADA View File Now a software solution is available for your Modbus (MB) needs in Rockwell/Allen-Bradley Control Logix or Compact Logix (Clgx) family processors, instead of a traditional 3rd party hardware like Prosoft MVI-56, Molex SST-SR4-CLX-RLL etc.  It is an Add-on instruction (AOI) for PLC/PAC firmware v16 or later, (other solutions are available for pre v16 systems).  For hardware interface, use PLC’s channel 0 (serial) or TCP/IP Interface module(s) to have as many MB TCP/IP devices or serial devices.  (Some limits apply based on system configurations, Comm. settings depending on HW used.) Connect any MB Client/Master or Server/Slave device(s) to your CLgx PLC, including flow computers, analyzers, VFDs, Power Monitors, Level gauges, Smart I/O, etc.  All the MB public/native function codes are supported.  32-Bit integers/floats as single entity are supported with byte and word level swapping. A separate utility automates the data mapping to your PLC logic.  Features -Serial Master (BASIC required Option); TCP; Slave; Redundancy; More than 5000 accumulative registers; MB CFC (Custom/Private Function Code) Support; Data mapping too – Between PAROCK1 & your PLC logic; Packaged with Rockwell; TCP/IP Interface Module; Volume Discounts; Annual Support Requirements -Rockwell/AB-CLgx processor with v16 or later.  Contact PCI for earlier versions. -If using CPU’s Chan0, you cannot use Chan0 for any other user mode activity. You can use it for non-user mode activities -TCP/IP Interface Modules from Rockwell/AB supported, are: -1756-EN2xx ControlLogix® Ethernet/IP communication modules, firmware revision 5.007 or later -1756-EWEB ControlLogix Ethernet/IP web server module, firmware revision 4.006 or later -1768-EWEB CompactLogix Ethernet/IP web server module, firmware revision 1.002 or later -1769-L30ER, 1769-L30ERM, 1769-L30ER-NSE, 1769-L33ER, 1769-L33ERM, and 1769-L36ERM CompactLogix controllers, firmware revision 20.011 or later -1769-L24ER-QB1B, 1769-L24ER-QBFC1B, 1769-L27ERM-QBFC1B CompactLogix controllers, firmware revision 20.011 or later -1769-L16ER, 1769-L18ER, 1769-L18ERM CompactLogix controllers, firmware revision 20.011 or later Other Related Services/Items -Custom PLC Add-on instructions building -PLC upgrades, troubleshooting, applications -PC Windows, iOS5, Linux, Mobile devices Comm. Drivers -Custom development, Technology Transfer Services  -Other Non-AB communication drivers for serial or TCP  -Full control system integration, training, architecture design This driver can be conviniently used with Visual Studio in development of complete large scale complex HMI/SCADA Systems. It can be used to perform advanced reporting MES, analytics, IoT, Big data type apps. One example is available to download here For More Info Overview of Parijat Drivers: Click here  Additional supporting Info about Parijat Drivers:Click here Complete Related Driver options: Click here     Submitter Scadadoctor Submitted 03/10/16 Category Other PLC Demo Software
  20. How to take single bit form input WORD by Structured Text? Can i write somethink like: inVar[i]  
  21. Dear all, I try to program function block. I have two WORD 402309 and 402310 in Hex the value is 410 for the first and 2A7A for the second. I need to read the value as a DWORD 4102A7A. Do there is DWord to DINT function block in concept 2.6? Do there is a way to convert the value easily? Regards.