Search the Community
Showing results for tags 'logo8'.
Found 4 results
-
Hi! I was doing an project using function block, but at one point it became too complex to use FBD so I would like to use ladder. I'm using an ihm and that's why some inputs are of the network type, in FBD, it's easy to use the network i/o, but in ladder, the network inputs, where I receive data from the ihm, don't have outputs for me carry out the logic. How can i do this? USING FBD USING LADDER As you can see, theres no output on network analog input, on the digital to!
-
HELP WITH ETHERNET COMMUNICATION LOGO8 SIEMENS AND KINCO HMI
Rodrigo Balsalobre posted a topic in Siemens
Hello! I was trying to communicate my siemens logo with an kinco hmi but this error are appearing on the hmi, what am I doing wrong? Im using an ethernet hub! ETHERNET SETTING ON THE HMI THE PUSH BUTTON THAT ACTIVATES M1 THE LAMP THAT'S REPRESENT "Q4" AND THAT I DON'T KNOW HOW ITS WORKS BUT I JUST PUT ON THE SCREEN TO THE PROGRAM ON LOGO SOFTCOMFORT I JUST SET THE LOGO AS SLAVE WITH THE HMI IP THE LOGO IP AND THE ERROR MESSAGE -
LOGO!SoftComfort | Another help with analog instructions
Rodrigo Balsalobre posted a topic in Siemens
Hello! I have a humidity sensor 0-10v and his measurepoints is for 10 to 90 humidity %. Using the Analog Amplifier, I set his measure range but theres a problem... he's only givin me integers numbers, and I need the decimal one's to. On the Analog Amplifier, with that range the program says that the gain on the measure is 0.08 for each number on the analog input, theres a way to see that decimal places? I tried increasing the measure range to 100-900 and set the decimal case to 1 but the gain turns to 0.8, with that I just can take jump number like 10.8->11.6->12.4. How can i do this on the way that I need? It's an LOGO 8! After setting measurement range from 100 to 900: -
Hello! I was trying to configure an Temperature Sensor using the Analog Threshold Trigger to parameters and output activation but, when I put this function on the program, there's just input point, on the output there's no way to link to an DO, when I select the other one's analog function's to see, they all have the same problem. How can I fix this?