Search the Community

Hello everybody, I have CJ2M-CPU35 connected to couple of devices over ethernet IP. I would like to know which bits in CIO area (25 words for built-in E.Net port starting at 1500) gives me the status of Individual nodes (i.e. connected or not connected) Tried to go through W465 but there is a lot of information and I'm getting confused with built-in port, additional E.net IP units, Fins TCP, Fins UDP etc.

Hello every body I need serial number for Siswin v3.4 or crack. I have original software Siswin v3.1, but i don't find token Someone may help me? Thank you

Hi All. I have a problem with D memory area. I have PLC CJ2M with ID211(DC input), ID211, OC211 (Relay output), OD212 (Transistor output) on the CPU rack. When I turn on all outputs in the OC211, all my datas in the D memory area is set to 0. What could be the problem? plc_project.zip

Hello all, I'm new to this forum, hope I will be able to get some answers on this forum. I'm wotking on maintanance for machines under productiona and I would like to conect one machine to my work PC. But when I try to setup conection with RSLinx, RSLinx don't see my PLC. Problem is that my PC is on network with IP addresses 192.168.8.XXX and machine is on 192.168.0.1 IP address and between is cisco RV180 routher which is set to have LAN address 192.168.8.168 (company network), and WAN is set as 192.168.0.200 (subnet 255.255.255.0, gateway 192.168.0.201, dns 192.168.0.202). When I conect directly 1756 ENBT/A card to my laptop (laptop is set to same range of IP addresses) I can see PLC and everything is working but this way is not practical for me. Is there any way to conect my office PC to PLC, some settings in RSLinx Clasic? Any idea would be helpful. I attached simplified network drawing for easyer understanding. network.pdf Thank you for your time and help, best regards, baric1007

I have a Simatic S7-1200 and i have a couple of questions :) I have three analog sensor giving information to the plc. software = Simatic step 7 basic V11 my questions: - can i connect the plc via a cable to a rooter to access the network to use a printer ? -can i connect a SIMATIC HMI KTP400 BASIC COLOR PN via a cable to a rooter to use with the plc via the network? - can i generate a document in the software , add my sensor data and print the document using all of the above ? thanks for all the help :)

Is possible to comunicate an Eaton/Cutler Hammer INCOM/IMPACC network with a Modbus network ? Any experience ? Many thanks in advance.

hello navigators anyone has ever tried with cx simulator to simulate the network with eternet query from another external PC turns to where cx simulator?