cyrus

I replace the CIF41 module and the problem solved now i cab download and monitor from HMI

Hi Dears I have one CP1H with CIF41 in its option port1. Firstly I connected to CIF41 ( ON DIP Switch 4,5) and I could download to CPU with ethernet FINS and I connected my HMI to this network and every thins be OK. after one week I power ON the panel and now CIF41 not working. every setting is ok (DIP switches and other settings). now when I connected to CIF41 no LED is on and my laptop network dont recognize the CIF41. can you help me? what is the problem?  

Hi dears  I have one CP1H CPU and CIF11 option port on it. CP1H will be slave and I want to use modbus slave function. (ABB is Master and CIF11 is slave) I check the logic with modbus poll and i didnt have any Receive from CIF11. I have some questions: 1- which terminal in CIF11 must be used? SDA+,SDA- or RDA+,RDA- ( I use Modbus RS485 two wire ) 2- I mounted CIF11 on port 2 and in setting of port 2 I Choose RS-232C in Mode, Stop bit=1, parity=none , Data bit=8. is there another settings? 3- I set CIF11 DIP switches ( ON,ON,ON,OFF,OFF,ON) is it OK? 4-I change 4,5 DIP Switches to ON in CP1H.   Thanks

Thank you for your respone i solved my problem all of cpu dip switches must be off RS232 mode for cif11 is ok this mode means no protocol in this option board setting other setting must be ok  

I dont want to change the ip address i want to use default ip address i connected before and now CIF41 not connected When i connect CIF41 to hub no led of hub on and bot detect the CIF41 maybe CIF41 out of service? i must change the module?

Hi dear how can i reset module with A525? can you explain more? i have same problem

Ethernet CIF41 doesnt work at all. i can not ping its default ip. when connect it to hub, led of hub is off. when i download with ethernet FINS it fail and say that the port dies not exit