inteligo461A
MrPLC Member-
Content count
7 -
Joined
-
Last visited
Posts posted by inteligo461A
-
-
Version of cx is 9.03. Below are settings I uploaded pic with and video of com port reaction while autoonline is on. cable is usb-com, i bought it to make sure that it isnt cable foult. And it seems that problem is on PLC side. But i have no idea what that can be. Its 3rd day i am fighting with this, i need some breaktrhu moment, help me please....:D Video is too big to upload it
but led is blinking as hell so there has to be connection. The com port test says that data were transmited and i can see led blinks each time i press send. Maybe it doesnt get confirmation from PLC, if yes, how to fix it?
-
-
i have cable like You described it , i put it wrong in previous post. But still doesnt work. please advice me smth. i bought cable to make sure that is not cable, also new serial port do pc and still nothing. how to proceed?
-
Hi everyone,
I got difficulties to get a connection between PC an PLC CP1E using serial connection.
Pc com1 port configuration: 9600, 7,2,E
PLC rs232 settings: 9600, 7,2,E - host link
cable configuration:
pc d-sub9 female---------plc d-sub9 male
housing---screen----housing
2----------------2
3----------------3
4-5 4-6
7-8
9----------------5
When i am trying auto online option I can see that diode is blinking but connection attempt is failed in the end. What am I doing wrong? Please help.
-
Thanks, for answer. That was it with dividing with /L. I figured it out until now but i apreciate that You answered anyway. Many thanks and have a good weekend. Regards
-
Hello,
This is my first post. I am trying to make a programm which has to measure length of the fabric and cut requested length. PLC is CP1e20ndra and encoder is E6B2-CWZ5B. All is connected and counter is working how it suppose to but i got a problem with surround it with propper math/functions to get desired result. Resolution is 1000 P/R. I am using measuring wheel with 200mm circut. Some how it gives me 4000 pulses per revolution. I am using linear mode. 4000p=200mm so to get value in cm i multiplied encoder's signals with 5 and divide it with 1000. I will miss fractional results but accuracy of 1 cm is eanugh. So i implemented easy math to do that but results seems to be false. I was thinking maybe data type range is not wide enaugh or so but i am using Dword for all registers. I aslo want machine to wind slow for a first 200cm of winding then speed up and slow down again like 200cm before it reach requested length and of course stop when it get there. Please have a look on my programm and give me some tips how to handle it. I know this are basics but this is first time i am working with encoder.
CT021 and IORD
in Omron
Posted · Edited by inteligo461A
Hi Aaron,
I am strugling with this right now. below print screens. Dip swith set to circular mode. Machine/unit nr , it read encoder's pulses which i can see on register 2122 but ca not get this rate value. Any hints?
edit: ok, i noticed tha unit number i set on 10 not 1 but even then(after correction) i doesnt work.