Milosh

MrPLC Member
 View profile  See their activity

  • Content count

    86

  • Joined

  • Last visited

Posts posted by Milosh

  6. Posted

    Sorry, it is NS5-SQ10-V2 touch panel, and CPU CS1H-H CPU64.

    On CPU is set Host Link Port to standard and mode Host Link.

    Also for panel is set in comm. settings Host LInk SERIAL A. Baud is 9600, Data bits 7 parity E and stop bits 2.

    I think that my colegues use rs232c null modem cable. So I need pinout for this type of cable.

    Thanks in advance.

  10. Posted

    21 hours ago, Michael Walsh said:

    @Milosh If your comment meant that you could not download the instruction sheet because the links above did not work, I have fixed them.

    Hi, thanks to all. No this module CS1W-CTS21 not CJ1W...

    Also I have instruction sheet for CS1W module, and there is section about DIP switches...

  12. Posted · Edited by Milosh

    Hi all.

    I need info how to set encoder resoluiton with DM words.

    In manual m+12 word is used to set resoultion, but if I want to set 10 databits, what I need to do.

    Example:

    I thinking about MOV instruction #10 to DM20112. Also if I need 24 bit resolution MOV #24 to DM20112.

    Before that I should to set  DIP switches 1...4 to ON.

    Thanks in advance...

  14. Posted

    Hi all

    Is there any document which describe how we can set let's say analog input module via DM adresses. 

    Which values of DM adddress corresponds  to enable analog input, to set input range, to set mean value processing etc.

    Example:

    If i want to enable conversion on all inputs I shold to se #FF in DM20000. But is there any doc. which explains which address and which values we should to use for 

    enabling, range etc.

    This is also interesting for some other modules, like CTS021...

    Thanks,

    Miloš

     

     

  15. Posted

    Hi all.

    I have task to change old cx-supervisor project v1.x which was worked on 1280x1024 resolution monitor.

    Now I need to upgrade to version 3.5, with monitor resoultion 1920x1080.

    I see in runtime settings->screen size option rescale checked, but my screens stay the same...

    Is there easy way to rescale screen and objects on screen to bigger resolution?!

    Thanks in advance,

    Miloš

  17. Posted

    Hi all

    Is there any problem if CPU is put like this (from right to left)

    slot 1 - PA209R

    slot 2 - ID231

    slot 3 - ID231

    slot 4 - OD231

    slot 5 - OD 231

    slot 6 - CS1H-CPU64H

     

    On CPU is program logic (with all configurations). CPU have different rack informations.

    I need to put it on rack (above) and upload program code to PC.

     

     

  22. Posted

    Hi all,

    Can someone explain how to upload project from NS5 HMI?

    1. Which cable to use and which software?

    I tried with crossover rs232 cable to port A, but can't upload project?

    2. Is it better to use USB cable?

    3. Do I need to change something on DIP switches on HMI device?

     

    Best regards,

    Miloš