banker

Hi Bob Why not have one Alarm block with one NC and one NO input leg. When it is an NC alarm put Always Off on the NO leg and if it is a NO alarm but Always On to the NC alarm leg. Banker

Hi I have downloaded Recovery update 8.1 to a NSJ12 V2 panel. I don't how to connect to the web server. I have tried by my IE 7 192.168.250.2 but it doesn't work. The NS panel is set for FTP/Web enable. And I can use the FTP part. ftp://192.168.250.2 Banker

Hi PMCR Thanks for the information. I was bad news for me. Anyway have anybody treid the new printout function (Pictbridge) ? Banker

Hi MPM Yes i have assiged a IP address to the terminal in comms settings. But i can't create a project ver 8.1 bucause i only hav cx-designer ver 2.1. Do you thing it is the reason?? Then i have to upgrade my cx-one. Banker

Hi Mike31 You can use CXP instruction help to find the instruction you need. I don't have cxp here but i think the instruction help you need is BIN. But try to insert a instruction an press detail. Banker

Hi Mike31 In CXProgrammer there is a icon for the simulator. Download the plc program to the simulator. In CX-designer there is a test icon select test to simulator and her you go. Banker

Hi tashinz You most a ver. 4 Cpu to do online edit. Banker

Hi Mehdi4467 See below tred ST timer Banker

Yes i have a list: Fabrikat Moel (European model name)NS System Version CANON & PIXMA iP5200 v6.20 PIXMA iP90 v6.20 PIXMA iP2000< v6.20 PIXMA iP3000 v6.20 PIXMA iP4000 v6.20 PIXMA iP4000R v6.20 BJ i80 v5 BJ i70 v5 BJC-85 v5 EPSON STYLUS PHOTO R320 v6.24 Stylus Photo 830U v5 Stylus Photo 870U v5 Stylus Photo 900 v5 Stylus Photo 925 v5 Stylus Photo 720 v5 Stylus C62 v5 But this printers is not on the marked any more . Is there a new list. Banker.

Hi ECSI I was told by Omron that the print is the same as if you make a screen print to the CF card. And that is with background color. I can't get the printer to work. I think it because i don't have the correct printer. The printers that are supported by the NS is not on the marked any more. If you can get the NS to print to a printer i will be very interested to now what printer you use. Banker

Hi PMCR Thanks Will try i out next Week Banker

Hi all I Need advice for connecting to NSJ controllers. I need to share 32 real val. and 64 bool but how. Blending unit 1: NSJ12 Ethernet build in NSJ connected to PC 1 with CXS via Switch. Profibus master build in NSJ. Blending unit 2: NSJ12 Ethernet build in NSJ connected to PC 2 with CXS via Switch. Profibus master build in NSJ. It is 2 separated blending systems with 2 control panels located in the same control room. Can I use the build in ethernet? PS. I don't want do use the 2 CXS PC as gateways. Banker

Hi You can also copy / paste from Word or PDF doc. Banker

Hi You can setup the card via th IO table and unit setup. Let the CXP generate the IO table for you. After that seleckt the analog card and right hand click on the card then you can set the card up. Banker Btw. why are you using D2801 and not 2801

Hi Carol Use a Int. var. as Weekday seleckt. Or Use some internal bool var. seleckt them as retain and then some Set/reset logik. Banker

Hi DM or D. mem. is only for "word" instruction ex. MOV. +,-,*,/, ect. W for bit work. SET, RSET ect. H for Word and bit but retain. Hope this can help you. Banker

Hi Pago 200 PLC on 1 network is many. How many tags do you have. Have you set update rate. Don't set update rate to fast if you have many tags. Banker

Hi I have made continous weighing system with Omron PLC. But this system is with a bin placed on 3 loadcell. The feeding is with a screwfeeder. Screwspeed controlled by VFD. I take a sample from the weighing transmitter every 200 msec. Make som calculation and transfere the result to a PID. Not Omron PID. The Omron PID can't do Aut./man bumpless. Try to make small diagram and post it. Banker

Hi Pawel Don't think you can use this modul. There is the max on and off delay on 1.5 ms. You also have to think about the bus scan time. Banker

I have a label on each push button light to identify it. When the push button light is on I lose the label. When it is off the label is there. Is it something I have missed?

Hi CX-programmer improvement: Data trace with Real format. Banker

Hi nurvasi Can it be a Hex or binary value of Word W450? What is the bit status in the PLC? 4000 Hex = 0100000000000000 4000 Bin = 0000111110100000 Banker

Hi sathaporn Don't think Omron PID instruction have real bunpless transfere yet. One of the reason there is somthing called cx-prosess lcb-05??? . PID is not Omron's strongest point in the PLC. look at Siemens and AB. fare better. in PID Banker

Hi Now it is working. I forgot to set the correct Unit no. in the master setup. Banker

Hi I have a NSJ12 with integrated Profibus Card. My problem is that I can't download to the Card. I have not problem with download by CX-designer or CX-programmer. I have tried profibus download via USB and Serial. I the CX-Profibus I can't find any settings for the online connection. Banker