Hi Guys,
i am looking for a device / relay / signal splitter, to split the signal coming from the LOAD CELL ( 0745A, Mettler Toledo ). into 2 signals,
currently the signal from LOAD CELL, is used at IND205 ( Mettler Toledo ), to monitor the Weight of the Baggage.
now i am going to install a new self checking kiosk which also need the weight signals from the LOAD CELL to display the weight,
i could have used a normal changeover replay for this purpose ( as the signals are not necessarily required same time at both display ) but i dont need to break the Shield from the cable,
the same needs to be continued as well,
Any1 know of any replay / device which can solve this issue ?
attached is the load cell and IND205 datasheet for more reference.
0745A_Load_Cell_Datasheet_130801_en.pdf
ind205-d_r4.pdf