star_69

Hi everyone, i have an FR-A720 with a profibus card FR-A7NP and i want to comunicate via Profibus with a QJ71PB92D that is connected to Q03UDVCPU. i have a program example for GX works2 that i download and there is a folder with two ".gsd" files. it's the first time i try to comunicate with QCPU via Profibus and i don't know how to install these ".gsd" files? any one have an idea ?(i know you do) thank you in advance!

sorry for waiting FX5U_CPU_PID_TEST.gx3

MX-MAE is a Mitsubishi software for programming the AM and GM series GSM modem(at least in europe). Anyone has any experience with this kind of application?

Hi everyone I have the MAM-GM106 GSM Modem,and i want o be able to read/write program from/to the AL2 controller. I read the manual and it says that it is posible via teleservice, but it doesn't say the way of doing this. i try to search it in MX-MAE software but i couldn't. Has any one try to read/write the program of AL2 controller via GSM-modem? another question is how i will send the program form my PC to the GSM-modem?  

Yes, and i have also MX-MAE. i read the manual of both software abought "teleservice"(this how Mitsubishi call the function to read and write program remotely via inteligent GSM modem ) but it only mention that it can be done not how to do it. do you have any experience?

Solve it!

 Kaare_t, thanks for the interest, No, i haven't solve it yet. I have the "rsp  err" red led light on, in the cpu.... and i can't receive data. i have check wiring, terminator resistor, gx configurator dp prog, gx works2 prog and inverter parametes. But i think there is a problem in FR-A7NP card, that normally the indication led should light up red if there is no connection, and green if there is connection, but in my project the indication led doesn't light anything. I read it in manual and says that if the inverter is off the indication light is off. i change the FR-A7NP card with a new one and it's the same, the indicating light doesn't light up. Any advise? do you remember facing something like that?  

Ok, now i'm back on this project and i've done some research.   Although, I still can’t communicate.   I find the GX configuration dp I open the gsd file I download the program to the plc. The “rsp. err.” Led, on the QJ71PB92D module is always on(red), when I run the diagnostics on GX configurator dp the error says ”exchange with the slave cannot be conducted” The wiring is good, and the settings in FR-A700 seems ok,   Anyone has any experience with projects like this? Anyone has a tested program for communication with inverter FR-A700 via profibus?  

Hi everybody, I have a problem with a LCPU that I want to remote read/wright the program. I have a LCPU that is connected to an Ethernet network, I know it is possible to read/wright program from a station of the network to from/to an LCPU. But is it possible to read/write program from a remote station (that isn’t in the network) via internet?   Any one has any idea?   Thanks in advance

Thanks for the reply TheoV. i will search if the first solution fits the application and i will inform you.

Hi altan i have pid example for FX5U, send me a mail and i can send it to you.

Hello everyone, I have a problem with a GT1450-QLBDE HMI that is connected with a FX3G PLC. (the following problem description is as it has been described to me, when i went to saw the application no error oqured) The problem of this HMI is that afrer some time of continious functionning (not certain time) the HMI start to loose the displaing data and i can't gine any command in the HMI(it does not respont). the only thing you can do is to power off and on the HMI. After power off and on, the HMI is working good for some time. any one have any idea about the reason why, this is hapening? thanks in advance.

ok i will answer yous previus question again Gambit: ANSWER: sometimes the only thing you can't see is the recipes, sometimes the hole display is not sawing. This is something that happens 2 or 3 times per day. i spoke to the maker of this machine and he told me that the previous time he saw something like this was fixed when he change the location of the recipes. I check the program of the HMI and i saw that the recipes are stored in Build in SRAM of the HMI (he is't using SDcard). do you think it's possible this is the reason why this disfunction occurs?

Dear Gambit Thanks for the quick reply. I think that the parts are visible, but the indication(like speed, etc..) is lost. I talked with the company that construct this application and they told me that they have seen this happen again. They told me it’s the Recipes that needs to move from the HMI to the PLC, but I don’t understand what they mean?

no i haven't solve it yet, but there are more ergent projects now so i will start it again when i find time, but i do download the GX configurator DP that i didn't have. thanks for the interest, if i have any news i'm going to come back.

Hi to everyone, I have a FX2N series PLC with an FX-EEPROM-8 memory and a E200 HMI. There was a problem when you try to inputs some variables from the HMI, and i ask from the company that produses this machine, to send me the program of the PLC and HMI, , They send it to me (the software to open it is Meldoc) and i write the program to the PLC but now there are More Viriables i just can't write, when i try to write these viriables the HMI goes to the next viriable for input. i try to rewrite the program and there was no lack, i was wondering if something is wrong with the eeprom, because i haven't write EEPROM before. any one has an idea? thanks in advance.

Hi everyone, i have an FR-A720 with a profibus card FR-A7NP and i want to comunicate via Profibus with a QJ71PB92D i have a program example for GX works2 that i download and there were a floder with two ".gsd" files. it's the first time i try to comunicate with QCPU via Profibus and i don't know how to install these ".gsd" files? any one have an idea ?(i know you do) thank you in advance

thank you theo V and Crossbow. i know i should have replace it with a newer series but this is what i had and we wanted something quick so... thank you all for the reply! i hope one day i can anser too. bye

Halo to everyone, I am having trouble with a PLC type: FX0-30MR-DS and I want to replace it with one I already have Type: FX0S-30MR-DS. Does anyone know if this replacement can happen or it is invalid? thank you in advance.

i just did the test, and it works fine ,thank you kaare_t!

thank you for the reply.

thank you for the reply, i will try it and will inform you

Hi guys, I’m new in the forum but I would like to thank you all because I have found very useful information in this forum the previous months. The question I have is about Mitsubishi AL2(XL) and GSM modem MAM-GM6. I want to enable the “alarm via GSM-SMS” function of AL2 through MAM-GM6 GSM modem. I read everything I’ve found in the internet but it doesn’t seems to work. I found some examples with both the programs for AL2 and GSM, I download them to, but it didn’t work either. In the examples I saw there weren’t any GSM function block in the AL2 program, is there a way to send SMS without this function block? Thanks in advance