-
Content count
254 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Calendar
Everything posted by NevergoldMel
-
It's Weintek that manufactures the maple systems HMI's and they don't look or programming anything like the Kadet or crismon HMI's. Software is free and seems to have every driver Kepware does.
-
Clean dry hands! One order of wings and you're gonna have problems all day!
-
It all depends on how you shape your airflow.
-
It's corrupt.
-
Normally, I suggest maple systems. Now either you're misusing Ether/IP in place of EIP or CIP or you are not going to find an HMI that can process an Ether/IP assembly.
-
Freewave bawahahahaha Their claim to 60 mile ranges make me think they are owned by flat earthers.
-
Forward Open Response message format
NevergoldMel replied to Mark Short's topic in Allen Bradley / Rockwell Automation
Dude over at http://forum.suppanel.com/viewforum.php?f=2 wrote a cip driver for his android app. Maybe he'll be up to chat about it. -
It was really bad with the net-eni's that could only handle 6 connections.
-
Is it possible to communicate PLC's with different ip range?
NevergoldMel replied to asteroidehk's topic in Allen Bradley / Rockwell Automation
If you setup routing you can talk across many subnets. -
The rockwell manual actually shows how to wire this. Ah, I see engineers must think positrons leave their atoms.
-
Learning about MicroLogix 1500
NevergoldMel replied to Triplett's topic in Allen Bradley / Rockwell Automation
Honestly, I prefer to use ClickPLC's if I have to go cheaper than CompactLogix. -
1769-IF8 module doesn't read my analog input
NevergoldMel replied to Velpandian P's topic in Allen Bradley / Rockwell Automation
Tie I in+ to V in+ -
Is it possible to communicate PLC's with different ip range?
NevergoldMel replied to asteroidehk's topic in Allen Bradley / Rockwell Automation
And the Gateway address. -
And somehow of a nightmare. But as for that error right click on the program icon and select "Run As Administrator"
-
It's vaguely possible that the program could have an excessive about of MSG blocks taking up all the supported connections try putting it in program mode and power cycling.
-
Plc-5/30a and 1784-my card
NevergoldMel replied to Warren's topic in Allen Bradley / Rockwell Automation
I'm with Mickey on this one but if that fails I tend to use 250ohm resistors to terminate, because I have a bag of them in the truck and if the bag of 500ohm resistors would be too much. -
Learning about MicroLogix 1500
NevergoldMel replied to Triplett's topic in Allen Bradley / Rockwell Automation
Ahh, 1500 is the worst of both worlds. Micrologix addressing and compactlogix card costs. -
Solid inverters, would put them beside Fuji and Altivars any day. Commissioning software is easy. Hooks up with regular old USB cable.
-
Looking for very old software ABB GOP2000
NevergoldMel replied to SKA AB's topic in General Topics - The Lounge
Try this link https://library.abb.com/en/results -
Instruments failing after power failure
NevergoldMel replied to mmd604's topic in General Topics - The Lounge
Twenty years is a good life for a flow meter. -
Upload first then write changes then download? Rewrite the whole place to work on maple systems? Which has user management in it's templates. I've never be satisfied with how FactoryTalk handles user management
-
How many tags? VTscada Lite is free for 50 tags up to ten licenses.
-
Gender Neutral Electrical Connector
NevergoldMel replied to BobLfoot's topic in General Topics - The Lounge
This is not a CNN forum. -
Discrete Input Module Issue on DL06 PLC
NevergoldMel replied to LemmyRose's topic in Automation Direct
Sounds like a dropped common.