tid_chai

I would like to know that if i have the old project " controlLogix 5563S+FlexBus-1794 " and then I ' d to add Um1500 ( servodrive ) . How can I do it ? And how can I write the program (่jog forward and revers with constant velocity) ? Please suggest the way to wiring and give me some examples for the program writting. I quite know too little about this. Please see the config as the file attached. Thank you in advance. rs-logix.bmp

hi all i have micrologix 1200 i up load program from it but i not see comment in program i need see comment What can be done. Thank

Hello All i want Test Dive 7 segment 2 Digit By Output (Y 8 Bit 4 Bit/1Digit) What should I do. Please give examples. Thank You

Thank you

Hello All My plant is PLC Ge Fanuce 90 30 I want to back up the inside. But I do not know what the Program to upload. And I do not have cable for connecting to the PLC. I have to do Thank You

hello All i have CPM2A and CP1E 2 Unit i want Tranfer data from CPM2A Through rs232c to 2 CP1E I can do?

Hello there, quick question. i have cpu 13 and scu32 i want read data from other device but I have no experience in omron Please give examples Thank you very much

Thank for Program but it Difficult to understand for me, please give a simple example of using PMCR to read data from node 1 of port 0 of the device at address 6001 (floating). Thank you.

hello 1 i see in IEC GX developer on Min Timer it no have i want use min timer how to Create min timer ? 2 in Step7 have 1 sec bit but in IEC GX it no i want call All_Way_On bit (in GX Devloper call m8000) Thank

hello all i use 322-5HF00-0AB0 output low= 4.2ma High=20.2ma i want to make low= 4.0ma and high=20.0ma How to solve the problem? thank you

How to scaling functions in the software ?

Thank For All

Thank You But I insist Please see Image ScreenHunter_2.bmp

Hello I have One Question in GX IEC can Edit Online ? if It can how to Edit online Thank you

Thank you

hello i want use s7 200 cpu 224 xp talk to analyzer by ASCII 485 port What extension No.? How to config and program for read ASCII? Thank

if output analyzer is rs485 db9 port i can see pin of s7200 in manual and direct conect (not use PPI adeptor)?

hello i use GX IEC and Q CPU+Q68ADI i want FB Scale consist of input min,input max,output min,output max, output to REAL special thank

thank now i can use Program

How to in install the library in a Q project (i install Unsuccessful)

Mostly i Program FX But It First Program In Q CPU i can see Data(system Address) from where?

Thank i can not open i use GX IEC V 7.04

Thank But this FB For FX CPU can not install in Q CPU project or can install?

How to communicate CP1L and CP1L It's a way ?

How to Plc Link? please Exemple Thank you