[controlLogix 5563S+FlexBus-1794+Um1500]

I would like to know that if i have the old project " controlLogix 5563S+FlexBus-1794 " and then I ' d to add Um1500 ( servodrive ) . How can I do it ? And how can I write the program (?jog forward and revers with constant velocity) ? Please suggest the way to wiring and give me some examples for the program writting. I quite know too little about this. Please see the config as the file attached. Thank you in advance. rs-logix.bmp

[micrologix 1200 up load comment]

hi all i have micrologix 1200 i up load program from it but i not see comment in program i need see comment What can be done. Thank

[mitsubishi Q cpu Dive 7 segment 2 Digit]

Thank you

[Ge fanuce 90 30]

Hello All My plant is PLC Ge Fanuce 90 30 I want to back up the inside. But I do not know what the Program to upload. And I do not have cable for connecting to the PLC. I have to do Thank You

[mitsubishi Q cpu Dive 7 segment 2 Digit]

Hello All i want Test Dive 7 segment 2 Digit By Output (Y 8 Bit 4 Bit/1Digit) What should I do. Please give examples. Thank You

[cmM2a And CP1E]

hello All i have CPM2A and CP1E 2 Unit i want Tranfer data from CPM2A Through rs232c to 2 CP1E I can do?

[Modbus in CJ2M CPU13]

Thank for Program but it Difficult to understand for me, please give a simple example of using PMCR to read data from node 1 of port 0 of the device at address 6001 (floating). Thank you.

[Modbus in CJ2M CPU13]

Hello there, quick question. i have cpu 13 and scu32 i want read data from other device but I have no experience in omron Please give examples Thank you very much

[analog output issue]

How to scaling functions in the software ?

[analog output issue]

Thank For All

[analog output issue]

Thank You But I insist Please see Image ScreenHunter_2.bmp

[analog output issue]

hello all i use 322-5HF00-0AB0 output low= 4.2ma High=20.2ma i want to make low= 4.0ma and high=20.0ma How to solve the problem? thank you

[GX IEC]

Hello I have One Question in GX IEC can Edit Online ? if It can how to Edit online Thank you

[S7 200 talk ASCII]

Thank you

[S7 200 talk ASCII]

if output analyzer is rs485 db9 port i can see pin of s7200 in manual and direct conect (not use PPI adeptor)?

[AI Scale For Q CPU]

thank now i can use Program

[AI Scale For Q CPU]

How to in install the library in a Q project (i install Unsuccessful)

[S7 200 talk ASCII]

hello i want use s7 200 cpu 224 xp talk to analyzer by ASCII 485 port What extension No.? How to config and program for read ASCII? Thank

[Timer min In IEC GX Developer]

Mostly i Program FX But It First Program In Q CPU i can see Data(system Address) from where?

[AI Scale For Q CPU]

Thank i can not open i use GX IEC V 7.04

[Timer min In IEC GX Developer]

hello 1 i see in IEC GX developer on Min Timer it no have i want use min timer how to Create min timer ? 2 in Step7 have 1 sec bit but in IEC GX it no i want call All_Way_On bit (in GX Devloper call m8000) Thank

[AI Scale For Q CPU]

Thank But this FB For FX CPU can not install in Q CPU project or can install?

[AI Scale For Q CPU]

hello i use GX IEC and Q CPU+Q68ADI i want FB Scale consist of input min,input max,output min,output max, output to REAL special thank

[How to communicate CP1L and CP1L]

How to Plc Link? please Exemple Thank you

[How to communicate CP1L and CP1L]

I want Transfer Bit form Master To Slave and Slave to Master