profmaster

Hi All, I need some help from all of you. I need find the manual for this positioning controller. It made from Japan by Ohm Electric. Model no. PS-201. I already search for it but can't find anyway. If somebody have this manual, I hope you can share it with me. Hope I can get good news. Thanks

No body know about this ar.!!???

Hi, I need some info regarding Siemens PLC. I'm new with this model, Siemens Simatic 505 Family, CPU PLC 555 I think this is very old model. I need do some modification. Is that possible I use RS232 to communicate with PLC. I want make from 1 PLC(main) to 2 PLC(slave). How I want communicate between PLC CPU using RS232? I found each CPU board have 2 com port. RS232 #1 and RS232 #2. RS232#1 is connected to Touch Screen and RS232#2 still available. What I must to do? One more thing, I found 1 card that know as Peerlink at each PLC rack. What is that? Please help. Thanks....

Hi, can somebody give me the simple ladder to accelerate the step motor. I need to do the modification to my machine. previously, the stepper run step-by-step. now, i need to make it continues run until i press stop. I already download the manual, and I tried the example given, but it not work. I don't have any experience with stepper before. My machine used Omron CQM1 CPU 43. The driver is Prime type model 2D33MA. Sleepy Wombat, I found the stepper used PLS and ACC. Your help much appreciates Thanks

Can give pin configuration or some else? What the manual that I need to refer actually?

Hi all, I need help to program my servo driver. Somebody can help me. I want modified servo speed. Before, it run pulse, but now I want to continued running. I trace wiring connection from servo driver to PLC. My servo driver I/O, connected to RS232. Whose know bout this? PLC type CQM1 CPU 43 Thanks.

Still can't communicate with NT. Is that any switch that I need to prog before do downloading.

Thanks

Hi, I somebody know how to make this programming cable. I tried to made it one, but it's not working. I'm follow the RS232 comp pin and NT20 manual This the configuration what I have done. RS232 9pin (PC) 1 2 Read Data 3 Send Data 4 5 SG 6 7 RTS 8 CTS 9 NT20 9pin (HMI) 1 2 Send Data 3 Read Data 4 RTS 5 CTS 6 7 8 9 SG So, Pin 2 to Pin 2 Pin 3 to pin 3 Pin 5 to pin 9 Pin 7 & 8 short (PC) Pin 4 & 5 short (HMI) Is I right about this wiring? Please help for this. Thanks

Hi everybody, I have some project to modified the machine. This machine used NT20M HMI. I don't have the software to upload/download the program inside HMI. Is anybody have the program to share with me. I feel so glad if somebody can help me about this. Your help much appreciate. Thanks...

Hi All. I have some situation that I need help with all of you. Please refer attachment. Front and back HMI using same program. Its give feedback to Mitsubishi through network connection. When production need changed recipe, they only need to change the no, and all save data will transfer to Mitsubishi PLC and Keyence PLC Center HMI is using diff program. It is only used to conrol Keyence PLC. My question is, how I can send the data from Front HMI to Center HMI using the network transfer. Or, is that have other way to send the data? Or, is that I need to used other program, such as Pro-Server? Please give some advice. Thanks

Hi. First of all, I not good in English. Sorry for that. Here, I have some situation that I need help with all of you. Please refer attachment. Summaries of this pict, GP-2600 below is the main HMI and GP-2600 above just the copy. All key-in data save at main HMI. GP-2500 use to control another station but it receive data from GP-2600 main. When we change recipie, GP-2500 should get the data that save in GP-2600 GP-2500 communicate with Keyence KV-1000. This station give 2 signal to Mitsubishi PLC (main). Good & NG signal. My question is, How to program the touch screen so I can link GP-2600 main and GP-2500? Is that I need special program?

Hai, I'm new here, I need help to communicate with Proface. I don't have the cable for this communication and the I try to communicate using ethernet. I already put IP address,but still cannot communicate. The system just show me, connection OK, and then stop.