starbuc84

So it is my understanding i can connect to the data highway on a slc 5/04 and on a panel view. I am talking of mainly on the 3 wire plug. So does how anybody know the pin out for the cable on a PCMK cable. I have the one with the rj 45 end and also one with the round end. I would thnk that i could wire a plug to connect to the dh 485 3 wire plug from a cable with the rj45 end on it goping to the pcmk card thanks

First problem, Panel view 600 with DH485 and RS232. Printer port enabled and can not get it to dis able on the panel view. I have been told I can not down on serial port if port is enabled. IT also known to me that I have to use the PIC setting in RS linx to down load over RS 232. Once I load the Pic in RS Linx it never allows me to " START IT"

correction dh485 not a plus which is on a panel view

i am using dh485 not on a panel view

Hello, I would like to have a separate page for alarms. I know that the alarm Banner is gloabal but can I get around that some way? I was thinking of a control list on a separate page but I am not sure of a way to acknowledge.I guess I could code it old fashion logic. Any ideas? Thanks

trying to connect to a older 5/04 and have no idea what program it has in it if anything. The fault lite blinks I am using cp3 cable and ran through all the com ports and 1 seems to communicaste with it cause I get a differnt error back , "check cable and switches." can i connect with this cable? If so why does AB sell a $1400 card to connect also? thanksfor the help